[ARCHIVED THREAD] - A2 UPPER TO FLAT TOP CONVERSION???

Posted: 12/8/2003 6:36:59 PM EDT

Can I turn my A2 upper into a flat top?

Posted: 12/8/2003 7:50:46 PM EDT

[#1]

You can buy a new flat top reciver for $90 and switch them out. It is not complicated, but does require a few tools.

Posted: 12/8/2003 9:28:51 PM EDT

[#2]

That's how the original concept came to be, gunsmiths milled them down and installed weaver bases. Then someone decided to make it easier- Flattop upper. Buy one it is simple and you don't have to be a machinist to do it right.

Posted: 12/9/2003 6:06:43 AM EDT

[#3]

Yeah I looked into this as well as I had an extra A-2 upper and though hey it would be a cheap way to get a flat top. After checking around it was no savings at all unless you are a machinist and have your own mill. Just buy a flat top, you will be happier with the results.

IPSC_GUY sends

Posted: 12/9/2003 9:31:10 AM EDT

[#4]

That is the same situation that I am in, I have an extra A2 upper and was trying to decide what to do with it. Any suggestions?

Posted: 12/9/2003 10:01:29 AM EDT

[#5]

Sell it on the EE for $100.

Buy a brand new flattop off the EE for [url=http://www.jobrelatedstuff.com/forums/topic.html?b=7&f=22&t=119504]$88[/url].

Posted: 12/9/2003 7:25:07 PM EDT

[#6]

This was my first Bushy (Vmatch 20). This is how they came- from the factory!
[img]http://www.boomspeed.com/kisara/A1toA3.jpg[/img]
It was the hot ticket- when it was new.

[ARCHIVED THREAD] - A2 UPPER TO FLAT TOP CONVERSION???

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - A2 UPPER TO FLAT TOP CONVERSION???

[ARCHIVED THREAD] - A2 UPPER TO FLAT TOP CONVERSION???