AR Sponsor
NSWDG Guns, Clones, and Discussion (Page 4 of 94)
Got in a couple of decent range sessions with the LVAW clone, zero complaints thus far. While the handguard gets as warm as one would expect, it's tolerable. On a related note I convinced the guy at ALTRD to start designing the proper heat shield for the LVAW handguard (which will be a drop-in fit since he already included the screw holes for it). He's also working on a very lo-pro scout mount that will still allow the use of an NGAL or PEQ15/LA-5 alongside the light body.  
|
| So w/ dev. switching over to Noveske, I'm actually curious as to what their current dm/ recce rifle or upper setup is. I believe it was touched upon slight in the nsw recce thread but just giving the nature of these units their is no way to fully confirm. |
IG @bayou_bengal-rifles
|
Originally Posted By MickeyWHS: Got in a couple of decent range sessions with the LVAW clone, zero complaints thus far. While the handguard gets as warm as one would expect, it's tolerable. On a related note I convinced the guy at ALTRD to start designing the proper heat shield for the LVAW handguard (which will be a drop-in fit since he already included the screw holes for it). He's also working on a very lo-pro scout mount that will still allow the use of an NGAL or PEQ15/LA-5 alongside the light body. https://i.imgur.com/ZxtaLYb.jpg https://i.imgur.com/lfY3V9L.png https://i.imgur.com/H2fvpHv.jpg that is good news |
|
Originally Posted By LsuJon: So w/ dev. switching over to Noveske, I'm actually curious as to what their current dm/ recce rifle or upper setup is. I believe it was touched upon slight in the nsw recce thread but just giving the nature of these units their is no way to fully confirm. Yeah. they have made some recent changes the past couple of years. Assaulters went to the P320 X Five and switched to the Noveske. What are they saying in the Recce thread? |
|
Originally Posted By LsuJon: So w/ dev. switching over to Noveske, I'm actually curious as to what their current dm/ recce rifle or upper setup is. I believe it was touched upon slight in the nsw recce thread but just giving the nature of these units their is no way to fully confirm. I'd like to know this as well. Seems like the 10.5" Noveske with ATACR is the NSW Recce rifle now |
|
Originally Posted By Eyekahn: I'd like to know this as well. Seems like the 10.5" Noveske with ATACR is the NSW Recce rifle now Originally Posted By Eyekahn: Originally Posted By LsuJon: So w/ dev. switching over to Noveske, I'm actually curious as to what their current dm/ recce rifle or upper setup is. I believe it was touched upon slight in the nsw recce thread but just giving the nature of these units their is no way to fully confirm. I'd like to know this as well. Seems like the 10.5" Noveske with ATACR is the NSW Recce rifle now So the short discussion starts on the bottom of page 56 of the nsw recce. Basically a guy "in the know" states this is what they are using and this is what they have and he cloned it. Only thing I find hard to believe is that he mentioned that the x24 was still the standard. Other than that it seems to be pretty believable. Also I'm not calling this guy a liar or anything at all, I'm just stating I can't confirm it's true or false as I do not know him. W/ the nature of these units it's not like we can just ask for a bunch of pictures from the guys in atm. |
IG @bayou_bengal-rifles
|
Originally Posted By LsuJon: So the short discussion starts on the bottom of page 56 of the nsw recce. Basically a guy "in the know" states this is what they are using and this is what they have and he cloned it. Only thing I find hard to believe is that he mentioned that the x24 was still the standard. Other than that it seems to be pretty believable. Also I'm not calling this guy a liar or anything at all, I'm just stating I can't confirm it's true or false as I do not know him. W/ the nature of these units it's not like we can just ask for a bunch of pictures from the guys in atm. Curious if the ATACR's will be on the .300 variants as well. |
|
Originally Posted By smartliketractor: That is Jenna Jameson sized. Why in the world would they keep that commercial size for mil guns? I realize that's the recipe they ran for commercial guns for years, but mil gun gas ports can be smaller given they are only fed certain types of ammo. Originally Posted By smartliketractor: Originally Posted By JohnnyUtah427: Confirmed gas port size at .081" measured. That is Jenna Jameson sized. Why in the world would they keep that commercial size for mil guns? I realize that's the recipe they ran for commercial guns for years, but mil gun gas ports can be smaller given they are only fed certain types of ammo. It is big... but how does it shoot? There must be a reason why they go with 0.081. I imagine they can choose anything they want. |
|
Originally Posted By 2Keylows: All this work for different markings and color.  https://i.imgur.com/ytyDWzkh.jpg You building one too? |
|
Originally Posted By eMc9001: Rip Noveske parts. I'm really struggling to find stuff right now haha. Originally Posted By eMc9001: Rip Noveske parts. I'm really struggling to find stuff right now haha. I noticed... At least they have a pretty IG page.  Originally Posted By LsuJon: Existence is pain... the way I look at it, I have 7+ months to source parts. Oh yeah. I fully expect a year plus on this guy, I don't have very good luck with Nfa items. |
Wtb: Wmx200 Rotational, DD Fde Mk18 Rail
"A Mk18 is a handgun with a stock"/"10.3 is a 50 yard and in gun"
"A Mk18 is a handgun with a stock"/"10.3 is a 50 yard and in gun"
|
Originally Posted By MNRidesHonda: https://i.imgur.com/szO2wSD.jpg Navy barrel and the forbidden ammo  https://i.imgur.com/JQ7Efzc.jpg Much sex. |
52 minutes of 75th Ranger Regiment playing with their toys... Failed To Load Title |
There are no coincidences
|
Noveske/DEVGRU cloners: Gunbroker has a few Buy It Now Gen 3 uppers at $500 each. That's $200 less than what they typically go for. https://www.gunbroker.com/item/899628438 |
There are no coincidences
|
Originally Posted By PFran42: Noveske/DEVGRU cloners: Gunbroker has a few Buy It Now Gen 3 uppers at $500 each. That's $200 less than what they typically go for. https://www.gunbroker.com/item/899628438 Damn they really go for 700? |
|
Originally Posted By eMc9001: Damn they really go for 700? I just checked GB completed listings and it looks like things have settled down a little. $550-700 seems to be the going rate now. The DEVGRU clone is going to be a thing for a while. |
There are no coincidences
|
Originally Posted By MNRidesHonda: https://i.imgur.com/Gt0T9XH.jpg Got held up on cerakoting my parts. But I should be doing them soon since I got a couple guys sending me their parts to do as well and I'll do them all at the same time. https://www.bigtexordnance.com/product/dead-air-sandman-s-fde-military-contract/?fbclid=IwAR3TnXTeMdhvcZM3UeLCM4kD74x2ARE2RyW_RUOdQ0XpjlOObIX1eSo01S8 Big Tex has 28 in stock |
|
Originally Posted By PFran42: I just checked GB completed listings and it looks like things have settled down a little. $550-700 seems to be the going rate now. The DEVGRU clone is going to be a thing for a while.  - me actually thinking about purchasing one as it's the last part I need besides the correct barrel |
IG @bayou_bengal-rifles
|
Originally Posted By UncleverUsername: https://www.bigtexordnance.com/product/dead-air-sandman-s-fde-military-contract/?fbclid=IwAR3TnXTeMdhvcZM3UeLCM4kD74x2ARE2RyW_RUOdQ0XpjlOObIX1eSo01S8 Big Tex has 28 in stock Coupon code alliancepd will get you 15% off too. |
|
Originally Posted By LsuJon: I purchased a complete novekse pistol from GB and I'm parting it out. So I just need the correct barrels and I'll be set... so Basically I'll never be set haha Smart move. I almost snagged a upper in 5.56 the other day but got beat to it. |
|
Originally Posted By smartliketractor: That is Jenna Jameson sized. Why in the world would they keep that commercial size for mil guns? I realize that's the recipe they ran for commercial guns for years, but mil gun gas ports can be smaller given they are only fed certain types of ammo. Military guns need to be able to operate in extreme cold. Who knows, maybe there have been new, lower, operating temperature range requirements derived from Arctic conflict CONOPS. |
|
Can we start compiling info on the first post like the other clone threads with relevant info for each one, like atleast the barrel length, manufacturer, and caliber to start? Edit: Are the LVAW using 6.75" barrels? Are the guys using them mostly running subs? |
|
Gunbroker has Noveske gen 3 uppers for $450. 7 in stock. https://www.gunbroker.com/item/899838776 |
There are no coincidences
|
Originally Posted By JohnnyUtah427: https://live.staticflickr.com/65535/51142215106_bc0302c2b5_b.jpg Niiice man. |
|
Originally Posted By JohnnyUtah427: https://live.staticflickr.com/65535/51142215106_bc0302c2b5_b.jpg Attached File |
Picked this up today. Most of the Parts are accounted for or are on the way. Only thing I need is the correct .300 barrel.... Dont know if that will ever happen. Gen 3 upper comes wen. Waiting on a barrel nut wrench to break this down to send it out to get cerakoted. Any recommendations on that front would be well appreciated. I can already tell this will be my fav build. 
|
IG @bayou_bengal-rifles
|
Found a guy local to me that does Cerakote. I'm trading him a Noveske MUR upper for some peanut butter. Attached File Anyone know where to get the 5.56 marked dust covers? |
There are no coincidences
|
Originally Posted By eMc9001: Are all you guys going with F prefix on your lowers or just going with whatever Gen 1 you can find? |
IG @bayou_bengal-rifles
|
Originally Posted By LsuJon: So I couldn't find an F prefix and after asking around I just went w/ the common W prefixed lower. From my limited understanding the F marked lowers were simply produced at the same timeframe as the contract ones. The only difference I could see in photos between the two was the serial numbers, maybe someone else could better comment on them however. “F” prefix has the updated engravings that is seen on the contract lowers. “W” is just the latest made lowers from this year. Same markings. Contract lowers actually got “X” marked prefixes in their serial numbers if I’m not mistaken. |
|
Originally Posted By JohnnyUtah427: "F" prefix has the updated engravings that is seen on the contract lowers. "W" is just the latest made lowers from this year. Same markings. Contract lowers actually got "X" marked prefixes in their serial numbers if I'm not mistaken. Are these close to the lowers Dev uses? |
|
Originally Posted By UndrGrndPrdcts: Can we start compiling info on the first post like the other clone threads with relevant info for each one, like atleast the barrel length, manufacturer, and caliber to start? Edit: Are the LVAW using 6.75" barrels? Are the guys using them mostly running subs? I’m curious about mil 300 loads too. 6.75” is the barrel length used by the LVAW. From what I understand it was never sold commercially on a complete gun until the TacOps. coregon can correct me if I’m wrong on that. I’d love more info in general about the LVAW guns. Especially current guns. |
|
Originally Posted By StealthGuy: I’m curious about mil 300 loads too. 6.75” is the barrel length used by the LVAW. From what I understand it was never sold commercially on a complete gun until the TacOps. coregon can correct me if I’m wrong on that. I’d love more info in general about the LVAW guns. Especially current guns. 1-5 twist is what makes that 6.75” barrel magical…. |
NSWDG Guns, Clones, and Discussion (Page 4 of 94)
AR Sponsor