Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
AR Sponsor
7/4/2016 11:00:15 PM EDT
Well folks, any word? I'm guessing 1-3MOA but I could be wrong, anybody have an answer? I'm using xm193 and m855 out of thier ddm4v7
7/4/2016 11:58:52 PM EDT
[#1]
It's more accurate than you.  Too many factors.  Get a decent trigger and you'll be shooting 1.5-2 MOA with 55 grain ammo pretty consistently
7/5/2016 12:16:35 AM EDT
[#2]
I do not actually own complete factory DD rifles but, I have used two of their CL Hammer Forged barrels and I've been pretty satisfied with their performance. With bulk 55gr FMJ, I can typically hover around 2-2.5 MOA with a RDS. I have never shot any match ammo through it and I'm certain it would shrink that group a little more but with the ammo I mainly use, torso hits out to 400 yards are what I require and the DD barrel delivers that performance.

7/5/2016 12:16:53 AM EDT
[#3]
accidental double post..
7/5/2016 1:04:57 AM EDT
[#4]
Here's a 5-shot group I shot during load development with a 16" DD barrel and Hornady 55gr FMJ with WC844 surplus powder.



The upper at the time had a 14" DD Lite handguard, Seekins ATC muzzle device, and a Burris XTR II 1-5x scope in a Larue SPR mount. I used a Harris S-BRM 6-9" bipod with a rear bag off the bench.
7/5/2016 1:19:19 AM EDT
[#5]
Are you asking how good it will do with 855 and 193?
If so the ammo would be the limiting factor.
7/5/2016 1:52:10 AM EDT
[#6]
With m193 my DD M4V3 is about a 4 MOA shooter, nothing special. With 64gr Gold Dots it's about 1.5". Truthfully gun is most likely a bit more accurate but my idea of shooting for groups is a T1 on a rickety picnic table.
7/5/2016 2:28:04 AM EDT
[#7]
With 50 grain federal tipped varmint it is 1 moa.  Geco 55 grain about the same.  I have the full DD M4A1 14.5...it is a sweet shooter, 0 issues..

Edit: that's with a crappy stock trigger...I like my stock M&P15-22 trigger better!
AR Sponsor