AR Sponsor
Posted: 6/7/2015 1:35:27 PM EDT
|
Which buffer springs are you guys running. I have a LMT Factory Lower on a factory PRI Mark12 Mod0 upper. I am running a carbine length buffer system and currently using the factory LMT Recoil spring.
I was thinking about picking up a Sprinco White spring, anyone currently using this? Thanks in advanced. John |
|
Quoted:
Which buffer springs are you guys running. I have a LMT Factory Lower on a factory PRI Mark12 Mod0 upper. I am running a carbine length buffer system and currently using the factory LMT Recoil spring. I was thinking about picking up a Sprinco White spring, anyone currently using this? Thanks in advanced. John Would probably get quicker responses in the mk 12 thread. But being that the stock is user specific as far as carbine or A1 or A2 tube, I'm not sure what spring us considered spec. But my guess would be the spring that comes w/ the Colt carbine extension or Colt A1 or A2 extension |
|
Quoted: Which buffer springs are you guys running. I have a LMT Factory Lower on a factory PRI Mark12 Mod0 upper. I am running a carbine length buffer system and currently using the factory LMT Recoil spring. I was thinking about picking up a Sprinco White spring, anyone currently using this? Thanks in advanced. John If so, keep using it. |
|
Quoted:
Which buffer springs are you guys running. I have a LMT Factory Lower on a factory PRI Mark12 Mod0 upper. I am running a carbine length buffer system and currently using the factory LMT Recoil spring. I was thinking about picking up a Sprinco White spring, anyone currently using this? Thanks in advanced. John I run a LMT SOPMOD stock assembly (standard buffer spring and H2 buffer). It functions just fine with my ADCO/WOA/PRI Mk12 Mod 0 upper. 
|
|
Quoted:
Does it run fine with the LMT? If so, keep using it. Quoted:
Quoted:
Which buffer springs are you guys running. I have a LMT Factory Lower on a factory PRI Mark12 Mod0 upper. I am running a carbine length buffer system and currently using the factory LMT Recoil spring. I was thinking about picking up a Sprinco White spring, anyone currently using this? Thanks in advanced. John If so, keep using it. Smart ass  but yes, this is the answer.
|
|
Quoted:
Smart ass but yes, this is the answer.Quoted:
Quoted:
Quoted:
Which buffer springs are you guys running. I have a LMT Factory Lower on a factory PRI Mark12 Mod0 upper. I am running a carbine length buffer system and currently using the factory LMT Recoil spring. I was thinking about picking up a Sprinco White spring, anyone currently using this? Thanks in advanced. John If so, keep using it. Smart ass but yes, this is the answer.Hard to disagree with this. When you try to fix something that isn't broken, is when it usually ends up broken. |
| I was able to borrow a friends Sprinco White buffer spring this afternoon and it did seem to soften the recoil slightly but it may just be in my head. I did however get pretty much exactly 3 o'clock ejection consistently of every single round and bolt lock back with XM193 and XM855 at the end of each magazine. So now I am thinking of just making it permanent. Thanks for the responses. |
|
Quoted:
I run a LMT SOPMOD stock assembly (standard buffer spring and H2 buffer). It functions just fine with my ADCO/WOA/PRI Mk12 Mod 0 upper. <a href="http://s100.photobucket.com/user/jamesrea_2006/media/jamesrea2011A/001_zpsem0dc7k0.jpg.html" target="_blank">http://i100.photobucket.com/albums/m8/jamesrea_2006/jamesrea2011A/001_zpsem0dc7k0.jpg</a> Quoted:
Quoted:
Which buffer springs are you guys running. I have a LMT Factory Lower on a factory PRI Mark12 Mod0 upper. I am running a carbine length buffer system and currently using the factory LMT Recoil spring. I was thinking about picking up a Sprinco White spring, anyone currently using this? Thanks in advanced. John I run a LMT SOPMOD stock assembly (standard buffer spring and H2 buffer). It functions just fine with my ADCO/WOA/PRI Mk12 Mod 0 upper. <a href="http://s100.photobucket.com/user/jamesrea_2006/media/jamesrea2011A/001_zpsem0dc7k0.jpg.html" target="_blank">http://i100.photobucket.com/albums/m8/jamesrea_2006/jamesrea2011A/001_zpsem0dc7k0.jpg</a> Beautiful Rifle !!! The Mod 0 will always be my favorite!!! |
|
Quoted: Smart ass but yes, this is the answer.Quoted: Quoted: Quoted: Which buffer springs are you guys running. I have a LMT Factory Lower on a factory PRI Mark12 Mod0 upper. I am running a carbine length buffer system and currently using the factory LMT Recoil spring. I was thinking about picking up a Sprinco White spring, anyone currently using this? Thanks in advanced. John If so, keep using it. Smart ass but yes, this is the answer. |
|
Quoted: Which buffer springs are you guys running. I have a LMT Factory Lower on a factory PRI Mark12 Mod0 upper. I am running a carbine length buffer system and currently using the factory LMT Recoil spring. I was thinking about picking up a Sprinco White spring, anyone currently using this? Thanks in advanced. John IIRC, Springco white springs are for carbine length gas systems. Though it runs just fine in my 16" midlength. |
|
Quoted: Hard to disagree with this. When you try to fix something that isn't broken, is when it usually ends up broken. Quoted: Quoted: Quoted: Quoted: Which buffer springs are you guys running. I have a LMT Factory Lower on a factory PRI Mark12 Mod0 upper. I am running a carbine length buffer system and currently using the factory LMT Recoil spring. I was thinking about picking up a Sprinco White spring, anyone currently using this? Thanks in advanced. John If so, keep using it. Smart ass but yes, this is the answer.Hard to disagree with this. When you try to fix something that isn't broken, is when it usually ends up broken. but then you know how to fix it back |
|
Quoted:
Would probably get quicker responses in the mk 12 thread. But being that the stock is user specific as far as carbine or A1 or A2 tube, I'm not sure what spring us considered spec. But my guess would be the spring that comes w/ the Colt carbine extension or Colt A1 or A2 extension Quoted:
Quoted:
Which buffer springs are you guys running. I have a LMT Factory Lower on a factory PRI Mark12 Mod0 upper. I am running a carbine length buffer system and currently using the factory LMT Recoil spring. I was thinking about picking up a Sprinco White spring, anyone currently using this? Thanks in advanced. John Would probably get quicker responses in the mk 12 thread. But being that the stock is user specific as far as carbine or A1 or A2 tube, I'm not sure what spring us considered spec. But my guess would be the spring that comes w/ the Colt carbine extension or Colt A1 or A2 extension no such thing as an A2 tube. You can use an A1 or A2 stock, but the tube and spring length would be the same. Carbine would be a little shorter. I use a USGI rifle tube/spring/buffer with mine and it runs flawlessly. |
|
Quoted:
IIRC, Springco white springs are for carbine length gas systems. Though it runs just fine in my 16" midlength. Quoted:
Quoted:
Which buffer springs are you guys running. I have a LMT Factory Lower on a factory PRI Mark12 Mod0 upper. I am running a carbine length buffer system and currently using the factory LMT Recoil spring. I was thinking about picking up a Sprinco White spring, anyone currently using this? Thanks in advanced. John IIRC, Springco white springs are for carbine length gas systems. Though it runs just fine in my 16" midlength. According to the info on the website, the red is for 16" carbine, the white is good for 18" plus and is basically a standard mil spec tension. I run the blue in my mid length 16" and also in my 14.5" Carbine and it is great. The white actually seemed to run great, i only fired 55 and 62 grain but consistently got 3 o'clock ejection every single round. |
AR Sponsor