AR Sponsor
Posted: 1/8/2011 6:21:04 PM EDT
|
figured i'd start this thread havent seen it done yet lets see some guns! sorry if its a repeat
http://i166.photobucket.com/albums/u93/rantheman2000/0108012211.jpg |
|
Quoted:
A couple of mine... http://media.ar15.com/media/viewFile.html?i=22091 24" Bushmaster Varminter with a Ziess 6.5-20x50 Mil-Dot in a LaRue mount, JP Trigger/Hammer/Spring Kit at 2.5 lbs. http://media.ar15.com/media/viewFile.html?i=22090 20" Bushmaster V-Match with a Nikon Monarch 3.3-10x44 Mil-Dot with a Bushy 2 stage match trigger and an ACE stock. Bill Nice FSB shave job. Did you do it yourself? J |
|
i kick myself everytime i see a bushmaster varminter. I sold mine and regret it every day. It Most accurate AR I ever owned , but I moved to 308.
That said , here is the .308 with a 22" barrel , this is a Fulton Armory UPR upper on the DPMS lower with a Mueller 8.5x25 mill dot ( till I get some thing better) and a timney trigger. 
|
|
Quoted:
Bill.... how do you like that skeleton stock i was thinking of getting one but am thinking with a 20" bull barrel it might make it tough to balance. I like the ACE stock, it is light weight and the foam feels very good and doesn't seem to get hot or cold. Nice for a good cheek weld. The weight balance (mine is a 20" HBAR) isn't an issue for me as I use it for bench work (playing). For off hand shooting it would need more weight in the back. The front sight bases are factory Bushmaster. I did cut one down a week ago to fit under an Omega-X rail. It is under a 9" mid-length rail on a carbine system. The Omega-X rail is one of the most narrow rails out there and I had to remove a LOT of metal. The belt sander was wonderful. It actually came out very nice but you really can't see it now as the rail is covering it. Kind of nice having a pinned gas block. Bill |
|
LOVEING the .260! i'v deer hunted with it for the last two seasons, taken 5 deer between 100 and 450 yards with handloaded 140gr Berger hunting VLD's
works great on deer, light recoil and those 6.5's just dont slow down. 
easily my favorite rifle (please don't tell my other guns!) |
|
Quoted:
.260 rem DPMS REPR with 24in Kreiger bbl http://i27.photobucket.com/albums/c183/J75player/REPR.jpg  Pure Sex! |
|
Quoted:
how do you like your larue upper? and how much did it run you? I love it. It cost me $1200. I've shot 3/4" five shot groups with my realoads fairly consistantly when I am having a good day. I came close to 1/2" groups a couple times, but everytime I pulled the last shot just slightly and the group ends up being around 1 moa. I usually shoot prone with a bi-pod, so my groups can get a s big as two moa when I am not shooting the best. It is my favorite rifle for shooting groups. I have a 16" stealth upper that I really like too. I have an ACOG on that one and I can usually shoot about MOA with that one when I do my part using a bipod though. |
|
Quoted:
Quoted:
im looking for a bipod like that.... how is it mounted to your upper? and also what brand is that Ifr your talking about my pic right above your post thats a harris Bi-pod and it attaches to the swivel stud on the front of the fore end. yeah thats the one... thanks alot ill look it up. |
|
Quoted:
.260 rem DPMS REPR with 24in Kreiger bbl http://i27.photobucket.com/albums/c183/J75player/REPR.jpg Waitaminute.....Did that DPMS come from the factory with that barrel? Very, very nice shooter. I'd love a 260. I'm doing a 6.5 Grendel first I think then a 260 after. Kind of "little brother/big brother" thing. Heres my 223 with a 22" Krieger. Not real good pics though, I need to get some better ones. 
And here it is ringing steel at 275 yards with the suppressor Click |
|
Quoted:
well, sorta 
I used to work for DPMS, and Kreiger custom made this bbl for me while they were competing for the contract to supply the bbl's for the REPR. So it came from the factory with it, but its not something that you can order Cheater...... Damn nice. So if theres no NDA's out there or anything, who did win the contract for the DPMS 260 barrels? I assume Krieger lost due to cost more than anything? |
|
well, I left before they had finalized the REPR. they were still considering Wilson, Kreiger, and one other MFG(dont member which one). So I couldn't tell you for sure which one they went with.
but I would guess Wilson based on the finale MSRP of the REPR But they wernt making the REPR in .260rem anyway (one of the reasons I got a custom job) |
|
Quoted:
Dont realy concider an 18" to be a "long barreled" gun, but since other put some in(and i guess it makes 20" with the comp )
DPMS SASS http://i27.photobucket.com/albums/c183/J75player/front.jpg http://i27.photobucket.com/albums/c183/J75player/brake.jpg Cool pic of the brake. 
|
|
Quoted:
Dont realy concider an 18" to be a "long barreled" gun, but since other put some in(and i guess it makes 20" with the comp )
DPMS SASS http://i27.photobucket.com/albums/c183/J75player/front.jpg http://i27.photobucket.com/albums/c183/J75player/brake.jpg Always thought those handguards looked real niiiccee. Haven't seen one in a long time tho, where did you get that one? |
|
Quoted:
Quoted:
Dont realy concider an 18" to be a "long barreled" gun, but since other put some in(and i guess it makes 20" with the comp )
DPMS SASS http://i27.photobucket.com/albums/c183/J75player/front.jpg http://i27.photobucket.com/albums/c183/J75player/brake.jpg Always thought those handguards looked real niiiccee. Haven't seen one in a long time tho, where did you get that one? thanx! got it form DPMS, its made by Badger ordnance |
24" Shilen barrel in .204 Ruger 1:9 twist, proven this afternoon to be able to shoot 55gn Bergers and shoot them pretty darn well. Rock River lower with RRA 2-stage. YHM upper. Bushnell Elite 4200 6-24x50. I has laid down a 2" rapid fire group at 200yds...a 20 round group :D. You can actually see the holes appear in the paper at that range. 
It's little brother, that was a total basket case until I put the Adams Arms piston kit on it. Evolution 16", 1:9 with a brake machined into the barrel. Built on a Sharps lower that looks and performs great despite the fact that the mag release button is *gasp* cut about 5 deg crooked. Samson Star EX rail. MOE furniture. Nikon Buckmaster 6-18x40 in an ADM Recon mount. Shoots straight and shoots soft but LOUD!!! |
|
Nice toys - mine is a 20" frankengun with bull barrel...no photos on this PC.
Would like to hear more about the trigger modifications you guys have made. My trigger pull is pretty hard. Is there an inexpensive way to improve the existing trigger or do I hae to go the expensive upgrade route? Thanks |
|
New Configuration:
http://i138.photobucket.com/albums/q247/ottofreddy/IMG_0044.jpg |
|
Quoted:
Nice toys - mine is a 20" frankengun with bull barrel...no photos on this PC. Would like to hear more about the trigger modifications you guys have made. My trigger pull is pretty hard. Is there an inexpensive way to improve the existing trigger or do I hae to go the expensive upgrade route? Thanks ive been told the upgraded rra triggers are a nice cheap upgrade.... somebody once posted a lower parts kit that included one for about 120 not sure where that was tho but anyways you get the trigger plus spare parts for less than youd be paying for most. have no first hand experience but it might be worth a try. |
|
Quoted:
http://img.photobucket.com/albums/v108/Chrissopher/WOAAR1.jpg 26" Shilen. I think I'm the winner so far. 
CHRIS What HG is that? |
AR Sponsor