AR Sponsor
Posted: 4/12/2010 3:29:49 AM EDT
|
Hi guys-
I finally got a nice weekend to go out and shoot at the local outdoor range last weekend and while it was a great time - I came home with a cold. I caught the bug again and now I can't stop thinking about building another AR. I currently have a standard 16" and a 7" pistol just for toying with, so I've been thinking about building a tricked out accuracy gun. I'm thinking a 20" barrel, but I'm not quite sure what next. From my understanding bull barrels are made for accuracy, but it seems like DPMS is the only place who really makes them and I'd like to go with a higher quality manufacturer. That said, I was thinking a SS bbl - am I correct in believing that these are higher quality/more accurate? If I went this route I could get a Stealth upper and feed my Larue addiction as well. 
I know you guys have opinions/answers, lets hear them 
|
| going soley on what ive seen here, a custom krieger barrel, white oak, or noveske barrel are all up there, for pure accuracy, ive read krieger is up for the best. Larue stealth have discusting accuracy as well, pretty much guarunteed sub moa for 1200 for an upper. |
|
If you want a factory built upper made for accuracy look at SS Noveske and LaRue. If you want to build one yourself there are quite a few great barrels by various companies out there if you do some research.
[ETA] Wes at MSTN would probably be the best guy to contact about building a very accurate upper. |
My 16" Stealth shoots sub moa and so does my 20" upper with a barrel from Superior Barrels. Both have ACOGs on them and are not set up for extreme accuracy but I do occasionally get groups under an inch at 100 yards when I do my part. Most of the time with that set up I get about an inch or inch and a half. I just got an 18" Stealth and I am waiting on the glass still should be here this month.  I ordered a USO SN3 1.8-10x TPAL. So I should see smaller groups using a higher powered scope.
|
|
Longer effects velocity. Other than that it has nothing to do with accuracy.
Likewise, bull barrels are made for accuracy but it's a matter of stiffness and mass to soak up heat that is helping, not inherent accuracy. More weight often helps keep a rifle steadier as well, but that doesn't have to be the barrel itself. Heavier barrels take longer to see any effect from heat build up, but also take longer to cool. The trade off here really depends on your shooting style and expectations. |
|
One of my builds is a JT Distributing Bull barrel 20" SS with 1/8 twist. I think it was around $500 for everything minus the lower. The thing is one of my most accurate AR's!!! It shoot WAY under an inch with decent loads. I have a 3-13x56 Doctor Optics scope and it is my designated Varmit rig. I keep wanting to build another varmit rig but then I highly doubt I will ever get any better accuracy no mater how much I spend.
WW |
AR Sponsor