AR Sponsor
Posted: 3/31/2010 7:21:20 AM EDT
|
New to the site (as a member) been a long time observer! Im looking for a good way to mount my pressure switch from my flashlight. I figured some of you had some innovative ideas to make it look more pleasing to the eye. If anyone has any ideas/pics, it would be greatly appreciated. I have an MP15OR with a 4-rail picatinny forearm!
thanks! |
| i attach mine with a bit of electrical tape because my pressure switch is fairly cheap. you can always go out and buy some 3M double sided adhesive, and stick to the back of your pressure switch then adhere it to wherever you want the switch. anytime you want to remove the stickiness, spray a little WD-40 on the glue and it dissolves readily. |
|
Hard to say without knowing how you grip the rifle, the type of switch, etc.
I don;t use a pressure switch for my white light (I prefer a pushbutton), but I do use one for my PEQ. I prefer to use the Tango down VFG which includes models that have a pocket sized for surefire pressure pads, and a model sized for Insight pressure pads. I use velcro to secure the switch in there. Works great for me. |
|
Quoted: +1 if using a VFG and http://www.midwayusa.com/viewproduct/?productnumber=150414 if not. Quoted: You could cut a piece of bike inner tube and use it to attach the pressure switch to your VFG (if you're using a VFG). i like the inner tube, too, because you can remove the flashlight easily  |
AR Sponsor