AR Sponsor
Posted: 11/8/2009 7:21:18 PM EDT
|
For some reason, when I flick my selector from safe to fire and I pull the trigger, the hammer does not release and fly forward. I took out my hammer to make sure it was in correct and everything looks like it's in place. What the heck is wrong? |
| +1 check the disconector.Do a function check..with hammer in fired posistion hold trigger to rear and cock the hammer by pulling the BCG back..then let it go forward..release trigger you should hear a click..if not its not releasing from the disconector.Check to see if disconector spring is in right and that the disconector moves freely within the trigger housing. |
|
Quoted: +1 check the disconector.Do a function check..with hammer in fired posistion hold trigger to rear and cock the hammer by pulling the BCG back..then let it go forward..release trigger you should hear a click..if not its not releasing from the disconector.Check to see if disconector spring is in right and that the disconector moves freely within the trigger housing. Yep, no click when I release the trigger. Looks like I gotta take this all apart  |
AR Sponsor