AR Sponsor
Posted: 9/13/2009 4:15:11 PM EDT
| I was looking at a used SW ar and the take down pin was so tight that I had to use a punch to push it through. The BCG also seemed sluggish. IS this really tight tolerances or is somehting not exactly right? |
|
Quoted:
I was looking at a used SW ar and the take down pin was so tight that I had to use a punch to push it through. The BCG also seemed sluggish. IS this really tight tolerances or is somehting not exactly right? ive never tried racking the bolt on an S&W M&P but was it lubricated or was it completely dry? if it was dry that might have been the problem. |
AR Sponsor