AR Sponsor
Posted: 5/25/2009 9:01:12 PM EDT
|
http://www.cheaperthandirt.com/ARR800-7.html
Would this be a good quality replacement for my RRA Entry Tactical. |
|
A good rail, but way over priced.
Try Bravo, they have it for $20 cheaper. Linky |
|
Oh, I missed it, Bravo has MI's new railed handguard, looks nice, same price...and it's Free Floating!!
Linky #2 |
|
Quoted:
the existing plastic hanguards on my rifle are about 6 1/4 inches or so, will the new ones i order have to be the exact same size? Yes. As far as the length goes and the areas where it connects to the gun, its all the same. Only difference as noted on Bravos website is on a Colt vs. other models. No gunsmith straight forward swap. FWIW, my buddy has had one on a Stag for 2.5 years with zero issues. Now if I was looking to putting a free floater on, my choices for best bang for the buck would be a YHM lightweight, followed by the MI unit. |
|
I have this on one of my ARs and I like it a lot. Not solid like a FF, but a hell of a lot easier to take on and off. |
| The MI 10" FF won't clear the gas block on my sabre middy and I thought it was pretty low pro. Sabre Middy w/MI Rail. The last couple pics show the upper with a Troy FF installed on it. The problem is the front ring won't clear the block. It might work on a carbine since the ring will be beyond the gas block. |
|
http://www.bravocompanyusa.com/YHM-2-Piece-Tactical-Handguards-Carbine-p/yhm-9670%20carbine%202pc.htm
Does anyone know if this model will fit a RRA Entry Tactical? I am trying to find a rail that will fit my rifle. The factory guards are about 6 to 6 1/4 inches. Trying to find rail that will fit. Probably wont buy a free float. |
|
Quoted:
http://www.bravocompanyusa.com/YHM-2-Piece-Tactical-Handguards-Carbine-p/yhm-9670%20carbine%202pc.htm Does anyone know if this model will fit a RRA Entry Tactical? I am trying to find a rail that will fit my rifle. The factory guards are about 6 to 6 1/4 inches. Trying to find rail that will fit. Probably wont buy a free float. The rails in the link are carbine rails. I'm assuming an Entry Tactical has a carbine gas system from the measurements you provided so yes, they will fit. |
|
Quoted:
http://www.bravocompanyusa.com/YHM-2-Piece-Tactical-Handguards-Carbine-p/yhm-9670%20carbine%202pc.htm Does anyone know if this model will fit a RRA Entry Tactical? I am trying to find a rail that will fit my rifle. The factory guards are about 6 to 6 1/4 inches. Trying to find rail that will fit. Probably wont buy a free float. Yes they will fit. The entry-tactical has a "carbine-length" gas-system and it is a "carbine-length" rail ...all is disco! -RH |
AR Sponsor