[ARCHIVED THREAD] - Colt lower help.

Posted: 4/4/2009 9:59:23 PM EDT

I remember someone had a diagram or list for Colt lowers as to what years they lost the front screw and went to a captured front pin. Also when they added the sear block, and when they added the oversized trigger and hammer pins.

If anyone as this info and can post this, it would be very helpful.

I need this info because I might be getting a 2002 built Colt target match hbar lower with front captured pin and no sear block. But I want to make sure it has regular pins and not the oversized ones.

Posted: 4/5/2009 5:35:50 AM EDT

[#1]

That probably has std size pins. Even if it had the bigger Colt pins, that's no big deal, there are still plenty of aftermarket triggers available for them.

Posted: 4/5/2009 6:33:35 AM EDT

[#2]

if you are getting a 02 gun the trigger pins will be 170

but it will not have a pinned sear block

Posted: 4/5/2009 6:40:36 PM EDT

[#3]

+1, pins will be .170.

While it will not have a pinned-in sear block, it will have the machined "wall" across the inside rear of the lower.

[ARCHIVED THREAD] - Colt lower help.

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Colt lower help.

[ARCHIVED THREAD] - Colt lower help.