AR Sponsor
Posted: 3/28/2009 10:26:19 AM EDT
| I have a Bushmaster AR15 and have purchased a new pistol grip for it. Can someone tell me where I can find a tool to reach the inside of the grip to unscrew it? It looks like it might be a hex type screw but I'm not sure since it is inside the hollow grip. Is it a special too or something I can pick up at my local sporting goods store? Thanks! |
|
You just need a 3/16 inch Allen wrench. At first when I was removing mine, I had a tough time trying to get it out. The problem is that you normally can't get enough torque on the stubby end of the wrench in order to twist the screw out. In order to get more torque, you need a longer lever arm.
torque = Force x distance of lever arm Obviously, you can't increase the force you are giving out, but you can increase the distance of the lever arm. I know. I'm a nerd. And I love physics. You can take out your bolt carrier and use that to extend the lever arm. It works like magic. Grab the bolt carrier, stick the wrench in the open side of the carrier, and twist it. |
|
of course you've never stripped a flat head screw when the driver slipped off it and then you couldn't get the screw out. Nope, never happened to me either. I would rather find a hex or even torx driver for something with threads than use a flat or phillips head tool.
Just my two cents. Wanna smack me in the mouth? |
|
The flatblade screw used in original Colts and some other ARs is a PITA as well, b/c it requires such a large screwdriver. Using the wrong size buggers up the slot, slips, and makes you say 'pshaw' and 'sassafrass'. The buttstock screw also requires a big blade.
A good gunsmith's screwdriver set should have hollow ground bits big enough not to jump the slot, and the kits come with large handled drivers that give plenty of torque. Or, you can grind a large regular screwdriver to make it fit. The use of allen keys has been addressed, but another advantage with the allen socket screw is in starting the thread in the receiver. While you are controlling the pistol grip, and the detent spring, it is sometimes difficult to get the screw started; lots easier with the screw captured on the allen key. Since the screw does thread in to aluminum, it pays to avoid a crossthread and also not overtighten the grip screw. Don't want to start another 'ruined a Cali legal lower' thread.... 
Moon |
|
Quoted: Quoted: So much love in every thread. How does someone innocently asking for help end up in people smacking other people in the mouth and insulting each others opinions and intelligence? Amazing. It's like we are in grade school again. Welcome to arf.com  +1 This place is truly weird. |
AR Sponsor