AR Sponsor
Posted: 1/21/2009 8:50:06 AM EDT
|
I want to replace the trigger in my SPR clone with a Geissele DMR trigger. The description in the Brownells catalog says this comes with an oversize hammer pin.
I really leary of doing anything to a lower (in this time anyway) that would alter it from original spec. I've used RRA two-stage triggers with KNS 2nd Gen anti-rotational pins before, for this same reason. I'm wondering if I can do the same here. If anybody has any experience with such please advise. Thanks |
|
Quoted:
I want to replace the trigger in my SPR clone with a Geissele DMR trigger. The description in the Brownells catalog says this comes with an oversize hammer pin. I really leary of doing anything to a lower (in this time anyway) that would alter it from original spec. I've used RRA two-stage triggers with KNS 2nd Gen anti-rotational pins before, for this same reason. I'm wondering if I can do the same here. If anybody has any experience with such please advise. Thanks You cannot use KNS pins with the HiSpeed triggers. |
|
Quoted:
Quoted:
I want to replace the trigger in my SPR clone with a Geissele DMR trigger. The description in the Brownells catalog says this comes with an oversize hammer pin. I really leary of doing anything to a lower (in this time anyway) that would alter it from original spec. I've used RRA two-stage triggers with KNS 2nd Gen anti-rotational pins before, for this same reason. I'm wondering if I can do the same here. If anybody has any experience with such please advise. Thanks You cannot use KNS pins with the HiSpeed triggers. what he said. |
|
Quoted:
Quoted:
Quoted:
I want to replace the trigger in my SPR clone with a Geissele DMR trigger. The description in the Brownells catalog says this comes with an oversize hammer pin. I really leary of doing anything to a lower (in this time anyway) that would alter it from original spec. I've used RRA two-stage triggers with KNS 2nd Gen anti-rotational pins before, for this same reason. I'm wondering if I can do the same here. If anybody has any experience with such please advise. Thanks You cannot use KNS pins with the HiSpeed triggers. what he said. why? |
|
Quoted:
Quoted:
Quoted:
Quoted:
I want to replace the trigger in my SPR clone with a Geissele DMR trigger. The description in the Brownells catalog says this comes with an oversize hammer pin. I really leary of doing anything to a lower (in this time anyway) that would alter it from original spec. I've used RRA two-stage triggers with KNS 2nd Gen anti-rotational pins before, for this same reason. I'm wondering if I can do the same here. If anybody has any experience with such please advise. Thanks You cannot use KNS pins with the HiSpeed triggers. what he said. why? anybody? |
|
Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
I want to replace the trigger in my SPR clone with a Geissele DMR trigger. The description in the Brownells catalog says this comes with an oversize hammer pin. I really leary of doing anything to a lower (in this time anyway) that would alter it from original spec. I've used RRA two-stage triggers with KNS 2nd Gen anti-rotational pins before, for this same reason. I'm wondering if I can do the same here. If anybody has any experience with such please advise. Thanks You cannot use KNS pins with the HiSpeed triggers. what he said. why? anybody? Other than KNS pins are a stupid wste of money, the Geissele Hammer doesnt have the pin in the middle like normal hammers. In short, dont do it. |
|
The oversize pin is only oversized by half a mil or so, its really not much. When you tap it into your lower it is still a clearance fit so there is no damage to your lower at all. Just use a little lube when putting the pin in.
The oversize pins should allow for less movement of the pins in the lower which results in a more consistent trigger pull. Edit: As stated above the KNS pins are not compatible with the high speed triggers, only the SSA triggers. This is due to the hammer pin retaining clip being off center. |
|
Quoted:
You JUSt ordered a SSA trigger'...AND your gonna get it this comming week?...I dont believe you  ...Your gonna get it in 6 mo.Rainier had them in stock on their website. I stumbled across it so I ordered one and then posted the availability in another thread. They're gone now. I gotta say I didn't expect anyone to call BS on that. 
|
|
Quoted:
Quoted:
You JUSt ordered a SSA trigger'...AND your gonna get it this comming week?...I dont believe you ...Your gonna get it in 6 mo.Rainier had them in stock on their website. I stumbled across it so I ordered one and then posted the availability in another thread. They're gone now. I gotta say I didn't expect anyone to call BS on that. i also got lucky with Rainier Arms also,usps dropped off my order friday.i had ordered some 20rd usgi mags but they sent 30 rounders so i called to see if they wanted them back or to reinvoice my CC for the difference,being the great guys that they are they just said to keep them.when i went to the website to reorder some 20's i saw SSA's in stock and he said they had just gotten a few in that am.needless to say "order in".i also hope to have mine here monday or tuesday.received my shipping confirmation less than an hour after i placed the order. 
i was also lucky and picked one up when they first came out b4 the huge backorders.and they were only $145 back then. 
i'll have 2 of them now and won't even be able to use them for a while. 
damn this waiting on tax stamps thing 
|
| Are the different models of Geissele triggers just for different competition classes? I would like to get a SSA but I have a Colt, and they only make them with the small pin. I am just looking for a good reliable trig for all around use. Any recommendations between the Match, Service, and DM? |
|
Quoted:
Are the different models of Geissele triggers just for different competition classes? I would like to get a SSA but I have a Colt, and they only make them with the small pin. I am just looking for a good reliable trig for all around use. Any recommendations between the Match, Service, and DM? I think they make them for colt's also. |
AR Sponsor