Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
AR Sponsor
10/15/2008 4:51:42 PM EDT
I'll be building a Colt 6920 up to be as close to an issued gun as possible.  What are the key components you guys would recommend... closest to issued gear.  Matech BUIS or KAC 300?  KAC rails and VFG or no?  Trijicon TA01NSN?


10/15/2008 5:00:33 PM EDT
[#1]
Trijicon ACOG TA31RCO-M4CP Riflescope. Standard issue for us Marines
10/15/2008 5:00:56 PM EDT
[#2]
6921 upper, KAC or Matech BUIS, ACOG/Aimpoint/EOTech sight, KAC M4 RAS forend, and you will be GTG.



10/15/2008 5:02:10 PM EDT
[#3]
Issued by whom would be the question.  Many units give a good deal of freedom to the shooter regarding their setup.
10/15/2008 5:05:41 PM EDT
[#4]
here are my attempts.  everything but a 14.6 inch barrel and full auto

10/15/2008 5:13:45 PM EDT
[#5]
height=8
Quoted:
Issued by whom would be the question.  Many units give a good deal of freedom to the shooter regarding their setup.


This is the only one I have seen. Most units will allow some leeway as far as using your own, but the ones that are issued to us are the Trijicon ACOG TA31RCO-M4CP Riflescope.

Trijicon ACOG TA31RCO-M4CP
10/15/2008 5:15:07 PM EDT
[#6]
+1 on the 6921 upper. Thats about as close as you can get.
10/15/2008 7:14:36 PM EDT
[#7]
Here are my three Colts
Colt MT6400c (SBR)


Colt MT 6400c (with 6921 upper and permanent FH)


Colt 6920, again with 6921 upper and permanent FH


and a Bushy lower/LMT 14.5" upper SBR

AR Sponsor