AR Sponsor
Posted: 12/19/2007 12:54:41 PM EDT
| I ordered about 20 C products 30 Round AR mags earlier this year and about 8 of them have split at the rear seam welds has anyone else experienced this with their mags? |
|
Mine work great. Contact the mfg if you have problems. C Products, LLC 28 Harvard St. New Britain, CT 06051 Phone: 1-866-274-0247 Fax: 1-941-792-4329 Sales: [email protected] Engineering: [email protected] |
| The rust on the springs are because they are chrome silicon springs. It's on their website that they have a surface rust but it won't rush through or affect the spring. I'm OCD so I took a CLP patch and wiped the springs down then wiped it down again with a dry patch. I've got some range mags that have the surface rust on them and I have been watching them to see if the rust gets any worse and after a year nothing else and no effect on the spring. |
| I have a dozen of the 30 round C product mags. About two weeks ago I loaded a full mag only to have about the first 8 rounds come shooting out the top. I found the seam had split near the top portion of the mag. I emailed C-product. They said no problem just send it back for a replacement. I said not worth me spending $6 to get a $12 replacement mag. They sent me there UPS number to ship on their dime. I'll let you know when I get my replacement. |
AR Sponsor