[ARCHIVED THREAD] - broken shell extractor usage

Posted: 4/30/2007 7:26:52 PM EDT

the rimmed end of my broken shell extractor is threaded and the length of the tool can be changed. how do i set it correctly ???

thanks,dennis

Posted: 5/1/2007 4:42:54 AM EDT

[#1]

I found this on Brownells Site:

Case head separation from over-fired or out of spec brass won’t ruin your shooting experience if you keep one of these handy tools in your pocket or field kit. Hardened, steel tool reliably and easily removes broken cases from AR-15/M16 or any other firearm chambered for either the .223 Remington or 5.56 NATO cartridge. Exclusive, threaded, two-piece design is adjustable for overall length so the tool completely engages the rim of the case mouth; cannot slip through or strip out. Very simple to use, drop the broken shell extractor into the chamber directly inside the broken case. Allow the bolt to close so the extractor engages the rim of the tool and draw back the bolt to open the chamber. The broken case will eject along with the broken shell extractor.

216.243.198.184/aspx/ns/store/ProductDetail.aspx?p=23311&title=.223+BROKEN+SHELL+EXTRACTOR

[ARCHIVED THREAD] - broken shell extractor usage

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - broken shell extractor usage

[ARCHIVED THREAD] - broken shell extractor usage