AR Sponsor
Pic Request: Recce style rifles (Page 219 of 220)
|
@Infidel4life11 this saddens me in a profoundly selfish way 
|
Joined:
May 2023
Posts:
1
EE: 0% (0)
RI, USA
|
Originally Posted By SteveMikeDettlebach: "woodland" build, 14.5 Aero, Primary Arms, Geissele, BCM, VLTOR, ADM, Sharps Bros, SOLGW, odds and ends https://i.ibb.co/kH9HKzY/IMG-3820.jpg https://i.ibb.co/hK04GvW/IMG-3787.jpg https://i.ibb.co/ZhvL1Fz/IMG-3789.jpg https://i.ibb.co/Zh45cvX/IMG-3811.jpg https://i.ibb.co/mNPCGvp/IMG-3816.jpg I dig it! What brand is that short pic rail section? Also who makes those mlok rail covers? *edit* Found the rail covers... B5 Systems if anyone else wanted to know. |
|
Originally Posted By AWHAILYEAH: Most def!! What rail is that? Helluva an intro Its an Aero Precision https://www.aeroprecisionusa.com/ar15-16-5-56-mid-length-gov-complete-upper-w-13-5-slimline-handguard-anodized-oc |
|
Originally Posted By SSOUNN: Happy Friday Ladies n Gents https://i.postimg.cc/0jsVdsKN/IMG-0764.jpg https://i.postimg.cc/7hnmKWSn/IMG-0788.jpg I dig the Aem5/Ops and URX we have at home combo. I just got the suppressor so I’m thinking of another upper to put together to use it on besides the Mod-h I have |
|
Originally Posted By Mblades: URX we have at home combo. Attached File |
|
Originally Posted By Mblades: I dig the Aem5/Ops and URX we have at home combo. I just got the suppressor so I’m thinking of another upper to put together to use it on besides the Mod-h I have Originally Posted By Mblades: Originally Posted By SSOUNN:Happy Friday Ladies n Gents https://i.postimg.cc/0jsVdsKN/IMG-0764.jpg https://i.postimg.cc/7hnmKWSn/IMG-0788.jpg I dig the Aem5/Ops and URX we have at home combo. I just got the suppressor so I’m thinking of another upper to put together to use it on besides the Mod-h I have Shoot I WISH IT WAS A URX  .. tired of waiting for one to be available
|
|
Originally Posted By CMCctx: @SSOUNN 13" or 14.5"? Originally Posted By CMCctx: Originally Posted By SSOUNN: Shoot I WISH IT WAS A URX .. tired of waiting for one to be available@SSOUNN 13" or 14.5"? Whatever size they used for the Mod URX I’m sure it’s the 13.. But I’m happy with the Troy haha |
|
Shot out my old barrel (PSA Freedom 16" Midlength to BRT OPTIMUM 16" CL) and swapped my archaic 1-4x24 Burris MTAC (I've had it for 7 years on this rifle) for a 2-10x36 Trijicon Credo. Attached File |
Why is the sky blue?
What makes the green grass grow?
What makes the green grass grow?
|
Originally Posted By SSOUNN: Happy Friday Ladies n Gents https://i.postimg.cc/0jsVdsKN/IMG-0764.jpg https://i.postimg.cc/7hnmKWSn/IMG-0788.jpg @ssounn what riser is that on the black rifle? |
We're the middle children of history
|
Originally Posted By Slyce: @ssounn what riser is that on the black rifle? Originally Posted By Slyce: Originally Posted By SSOUNN: Happy Friday Ladies n Gents https://i.postimg.cc/0jsVdsKN/IMG-0764.jpg https://i.postimg.cc/7hnmKWSn/IMG-0788.jpg @ssounn what riser is that on the black rifle? Sent you a PM |
|
Originally Posted By slowkota1: Hmmmm... https://i.imgur.com/6jgnxZX.jpeg https://i.imgur.com/g04AHlq.webp https://i.imgur.com/Qg2bWnk.jpeg Of course the lower rail mounts are right where the adjustment knob is... Had to do some dremeling lol. https://i.imgur.com/0oPdZxj.jpeg |
|
Originally Posted By Daggertt: You completely negated the unique feature of the riflespeed gas block, which is easy access to finger adjustments. You'd have been better off with a strike industries adjustable gas block which is cheaper and easier to adjust with a bullet or tool through an mlok slot. Originally Posted By Daggertt: Originally Posted By slowkota1: Hmmmm... https://i.imgur.com/6jgnxZX.jpeg https://i.imgur.com/g04AHlq.webp https://i.imgur.com/Qg2bWnk.jpeg Of course the lower rail mounts are right where the adjustment knob is... Had to do some dremeling lol. https://i.imgur.com/0oPdZxj.jpeg Meh, it was free |
|
Originally Posted By WUPHF: It starts again. https://www.ar15.com/media/mediaFiles/294984/IMG_9688_jpeg-3273830.JPG #jealous. What's the weight on that bad boy? |
Shooting things from far away....ish.
|
Originally Posted By WUPHF: It starts again. https://www.ar15.com/media/mediaFiles/294984/IMG_9688_jpeg-3273830.JPG Beautiful! Who did the dimpling? |
|
Originally Posted By Virginia_Shooter: #jealous. What's the weight on that bad boy? Originally Posted By Virginia_Shooter: Originally Posted By WUPHF: It starts again. https://www.ar15.com/media/mediaFiles/294984/IMG_9688_jpeg-3273830.JPG #jealous. What's the weight on that bad boy? 34.9oz Pre-dimpling it was 44oz, so shaved a nice little bit off. |
|
Originally Posted By tasty_chicken: Beautiful! Who did the dimpling? Originally Posted By tasty_chicken: Originally Posted By WUPHF: It starts again. https://www.ar15.com/media/mediaFiles/294984/IMG_9688_jpeg-3273830.JPG Beautiful! Who did the dimpling? Templar Precision. Dude does phenomenal work. |
Joined:
Dec 2022
Posts:
587
EE: 100% (230)
OR, USA
|
Is that FCD rail the “burnt bronze” Cerakote they offer? |
|
Originally Posted By WUPHF: It starts again. https://www.ar15.com/media/mediaFiles/294984/IMG_9688_jpeg-3273830.JPG I like your style and checked out his website and like his work/price and will be sending him a Noveske Infidel and Afghan to be dimpled............. 14.5" SS Centurion Arms Recce (Leclair/Pitts Colab)   
|
|
Originally Posted By Three0h8: https://i.imgur.com/vhAMgJn.jpg RMR HRS arrives today, waiting on a 10mm spacer, then just need to swap out the stock and grip What barrel and length rail is that? I have the same optic on a 16" BRT build I've put together. It's a great scope. Attached File |
Why is the sky blue?
What makes the green grass grow?
What makes the green grass grow?
|
Originally Posted By 11boomboom: What barrel and length rail is that? I have the same optic on a 16" BRT build I've put together. It's a great scope. https://www.ar15.com/media/mediaFiles/523928/20240529_120439_jpg-3286325.JPG It's a 14.5" Criterion core and 13.5" mk16. Your rifle pushed me over the edge to remove the TA110 and put the credo on there. Planning to run either a B5 sopmod or a CTR like you have as well, I just had this lower laying around to put it on for now. |
|
Originally Posted By Three0h8: It's a 14.5" Criterion core and 13.5" mk16. Your rifle pushed me over the edge to remove the TA110 and put the credo on there. Planning to run either a B5 sopmod or a CTR like you have as well, I just had this lower laying around to put it on for now. Originally Posted By Three0h8: Originally Posted By 11boomboom: What barrel and length rail is that? I have the same optic on a 16" BRT build I've put together. It's a great scope. https://www.ar15.com/media/mediaFiles/523928/20240529_120439_jpg-3286325.JPG It's a 14.5" Criterion core and 13.5" mk16. Your rifle pushed me over the edge to remove the TA110 and put the credo on there. Planning to run either a B5 sopmod or a CTR like you have as well, I just had this lower laying around to put it on for now. I'm considering building a 14.5 upper for my setup, too. I think 16" is a bit too long with a suppressor for screwing around. I also removed the Arisaka bag rider stuff from my CTR and it's a lot better, IMO. With the Arisaka stuff, the stock weighs a little more than a SOPMOD. |
Why is the sky blue?
What makes the green grass grow?
What makes the green grass grow?
|
Originally Posted By 11boomboom: I'm considering building a 14.5 upper for my setup, too. I think 16" is a bit too long with a suppressor for screwing around. I also removed the Arisaka bag rider stuff from my CTR and it's a lot better, IMO. With the Arisaka stuff, the stock weighs a little more than a SOPMOD. I had a DD LW barrel in this upper with a BCM MCMR before I switched out the barrel/rail. It made the rifle seem a bit long/front heavy with my Turbo K on the end. I haven't shot this upper with the credo/Geissele handguard yet, but I did shoot it with a TA110/14.5/MCMR setup and much preferred the shorter length. I haven't fully settled on my preferred stock yet. I didn't realize the arisaka additions added that much weight, so I may just keep the BCM stock on this gun. I like that I can't shorten the LOP on the BCM with a rear bag on accident like I can the sopmod. |
|
Originally Posted By Three0h8: I had a DD LW barrel in this upper with a BCM MCMR before I switched out the barrel/rail. It made the rifle seem a bit long/front heavy with my Turbo K on the end. I haven't shot this upper with the credo/Geissele handguard yet, but I did shoot it with a TA110/14.5/MCMR setup and much preferred the shorter length. I haven't fully settled on my preferred stock yet. I didn't realize the arisaka additions added that much weight, so I may just keep the BCM stock on this gun. I like that I can't shorten the LOP on the BCM with a rear bag on accident like I can the sopmod. Originally Posted By Three0h8: Originally Posted By 11boomboom: I'm considering building a 14.5 upper for my setup, too. I think 16" is a bit too long with a suppressor for screwing around. I also removed the Arisaka bag rider stuff from my CTR and it's a lot better, IMO. With the Arisaka stuff, the stock weighs a little more than a SOPMOD. I had a DD LW barrel in this upper with a BCM MCMR before I switched out the barrel/rail. It made the rifle seem a bit long/front heavy with my Turbo K on the end. I haven't shot this upper with the credo/Geissele handguard yet, but I did shoot it with a TA110/14.5/MCMR setup and much preferred the shorter length. I haven't fully settled on my preferred stock yet. I didn't realize the arisaka additions added that much weight, so I may just keep the BCM stock on this gun. I like that I can't shorten the LOP on the BCM with a rear bag on accident like I can the sopmod. I like the CTR for the same reason. It won't collapse like the SOPMOD when shooting with a rear bag. The Arisaka kit not only requires the bag rider (which is nice metal), but it also requires their Stock Angle Adapter kit to bolt to the CTR. The adapter kit is two pieces of metal plus a thicker Magpul SL pad and is a noticeable weight increase. Feels more heavy than a SOPMOD to me. |
Why is the sky blue?
What makes the green grass grow?
What makes the green grass grow?
|
Originally Posted By 11boomboom: I like the CTR for the same reason. It won't collapse like the SOPMOD when shooting with a rear bag. The Arisaka kit not only requires the bag rider (which is nice metal), but it also requires their Stock Angle Adapter kit to bolt to the CTR. The adapter kit is two pieces of metal plus a thicker Magpul SL pad and is a noticeable weight increase. Feels more heavy than a SOPMOD to me. Have you seen the SubRev Tech bag rider for the CTR? It weighs less than 1oz, but it is made of polymer if that matters. |
|
Originally Posted By Three0h8: Have you seen the SubRev Tech bag rider for the CTR? It weighs less than 1oz, but it is made of polymer if that matters. Originally Posted By Three0h8: Originally Posted By 11boomboom: I like the CTR for the same reason. It won't collapse like the SOPMOD when shooting with a rear bag. The Arisaka kit not only requires the bag rider (which is nice metal), but it also requires their Stock Angle Adapter kit to bolt to the CTR. The adapter kit is two pieces of metal plus a thicker Magpul SL pad and is a noticeable weight increase. Feels more heavy than a SOPMOD to me. Have you seen the SubRev Tech bag rider for the CTR? It weighs less than 1oz, but it is made of polymer if that matters. Yeah. If I go with another bag rider, that's what I'm going with. I'm not a fan of 3D printed textures, though. |
Why is the sky blue?
What makes the green grass grow?
What makes the green grass grow?
|
Originally Posted By 11boomboom: Yeah. If I go with another bag rider, that's what I'm going with. I'm not a fan of 3D printed textures, though. Originally Posted By 11boomboom: Originally Posted By Three0h8: Originally Posted By 11boomboom: I like the CTR for the same reason. It won't collapse like the SOPMOD when shooting with a rear bag. The Arisaka kit not only requires the bag rider (which is nice metal), but it also requires their Stock Angle Adapter kit to bolt to the CTR. The adapter kit is two pieces of metal plus a thicker Magpul SL pad and is a noticeable weight increase. Feels more heavy than a SOPMOD to me. Have you seen the SubRev Tech bag rider for the CTR? It weighs less than 1oz, but it is made of polymer if that matters. Yeah. If I go with another bag rider, that's what I'm going with. I'm not a fan of 3D printed textures, though. They also make a lo-pro lever for the sopmod stock, so it won't collapse while on a bag. 😆 |
|
What's the brand of that receiver/handguard connecting rail? Thanks. |
|
Originally Posted By PappyM3: What's the brand of that receiver/handguard connecting rail? Thanks. Originally Posted By PappyM3: What's the brand of that receiver/handguard connecting rail? Thanks. It looks like 2 different risers. The one on the handguard with no cross bolts looks like a YHM. Not sure about the one mounted to the receiver. |
“Necessary? Is it necessary for me to drink my own urine? No, but I do it anyway because it’s sterile and I like the taste.” -Patches O’Houlihan
"I don't eff with poorsies."
-Mona-Lisa Saperstein
"I don't eff with poorsies."
-Mona-Lisa Saperstein
|
Originally Posted By Luny421: It looks like 2 different risers. The one on the handguard with no cross bolts looks like a YHM. Not sure about the one mounted to the receiver. That rear riser on the receiver is made by BCM. I have one of those as well, but haven't used it yet. |
Pic Request: Recce style rifles (Page 219 of 220)
AR Sponsor