AR Sponsor
Posted: 4/29/2006 6:35:33 AM EDT
| Ok this is simple...the gas tube won't comeout of the gas block. roll pin is out and the bock is off of the rifle...any ideas? |
Carbon build up is the problem. Clamp the tube in a vice with some leather or other material to keep from marring the gas tube. Grab the gas block with your hand and rotate it right to left until it loosens up. Once you brake the carbon loose it should come off by working right to left whilst pulling on it. A squirt of Liquid Wrench may also help. After you get it out clean it up with a Scotch Brite pad. Denny |
vice grips will do the job. You don't need to crush the tube, but clamp them on and a little twist and pull will get it out. (some CLP wouldn't hurt either). |
AR Sponsor