[ARCHIVED THREAD] - Help with removing FSB

Posted: 3/31/2005 1:13:50 PM EDT

I have a perm attached phantom and I want to get rid of my standard FSB and replace it with a folding one with the gas block all one piece. It's one of the YHM products. The YHM is easy to mount because it uses brackets with screws so I won't have any problems putting on the new one. Do I have to cut off the old FSB? I don't care if I ruin it. What do I do? Thanks.

Posted: 3/31/2005 1:25:19 PM EDT

[#1]

It sounds like you have to cut it off.

Posted: 3/31/2005 2:08:47 PM EDT

[#2]

Use a dremel with a cutting wheel, but be very careful not to nick the barrel. but if you do use Birchwood Casey's flat-black touch-up pens.

Posted: 3/31/2005 2:11:15 PM EDT

[#3]

Yep, you gotta cut it off. Knock the pins out first, then just use a dremel cut off wheel on the sight...

Posted: 3/31/2005 8:21:09 PM EDT

[#4]

Instructions for removing a FSB are included about half-way down this guide:

www.ar15.com/forums/topic.html?b=3&f=4&t=226782

[ARCHIVED THREAD] - Help with removing FSB

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Help with removing FSB

[ARCHIVED THREAD] - Help with removing FSB