AR Sponsor
Posted: 12/8/2004 11:18:37 AM EDT
| I've got an M4 barrel with a y-comp attached. Could anyone suggest a good place to to have it removed and swaped out with something else? |
|
Do you know how the y-comp is attached, and what is the barrel length with the y-com removed? If it is pinned and soldered on to a threaded 16" barrel, you can probably do it yourself. I've removed a couple of brakes since 9/14, but not a y-comp. If you can't or don't want to do it yourself, ADCO or Kurt's Kustom can do it. Kurt is usually pretty backlogged. Either of them do good work. |
| My y-comp was threaded on and pinned. I got it off by drilling out the welds and they just fell out. I then just unscrewed it. The hard part was for me to pin and weld on another (Phantom 2C). Wasn't difficult, but I desparately wanted to keep it un-pinned..but alas, getting caught with an unregistered SBR is not worth it.... |
| Wilson Combat will do it for you.Give them a call and talk to a rep.Right now they are installing A2 type flashiders for $75 dollars.If they have to remove your brake it's a little more that's why you need to speak to them first..They also have a brake that looks like a FS for about $97 installed.Turn around time is quick, my flatop was back in a little over 2 weeks when i had them install the brake.They did a great job. |
AR Sponsor