AR Sponsor
Posted: 9/24/2004 3:36:57 PM EDT
| I'm trying to install a Tango Down Battlegrip and it's too narrow to fit on my Stag Lower. Normal? |
| Yeah, a lot of aftermarket grips are real tight. It should just take a few knocks to get it on... dont be afraid. If it's REALLY tight you might have to bevel the edges of the grip (with a file) to help get it started. Just think how solid it will be once you get it on there. |
|
BigCracka, be sure not to pound it all the way on before getting the screw started. If you do, the screw will be difficult to line up with the hole and you risk stripping threads. The screw needs to be started and the tightening of the crew should be used to seat the grip all the way down to the receiver. So tap it an about 3/4 of the way or enough to get the screw started. rock the grip as needed to align the angle of the screw to the hole. Then begin tightening. good luck Once its on, you wont be dissapointed 
|
AR Sponsor