AR Sponsor
Posted: 5/26/2004 5:15:34 AM EDT
|
I have a Redi-Mag and I keep it around as a "just in case I need it when TSHTF", but I pulled it out last night and started wondering about it. I haven't seen too many, if any, Redi-Mags in action in the field. I see alot more dual mag clamps out there in pics. Is there some tactical flaw with the system that makes it not field worthy? Added weight? Hinders some other more important function? Just wondering if I should keep it around or get rid of is and get a couple of mag clamps. |
|
I use one on my IPSC match gun, as it gives me a very fast and fumble-free reload. The spare mag is carried securely and the top rounds are well protected against dirt/damage/movement (a risk with an exposed spare mag). The used mag is typically jettisoned during a reload, rather than being retained with the new mag as with a coupler, and this has its pros and cons. The bolt release and mag release work the same as on a regular AR, although the bolt release is a bit smaller. The extra mag will add extra weight and affect the rifles balance of course, the same as a mag coupler, but the RediMag alone is not really noticeable. The spare mag can rattle a tad though. If you feel you must have a second mag attached to your rifle (and this is really a matter of your personal preference and application) then, in my opinion, the RediMag is the best solution. As to why you might see more mag couplers around, price could have something to do with it... duct tape is cheaper than the RediMag. YMMV, of course. One last comment: if you might have to rely on this rifle to save your life, you ought to think about practicing with the RediMag now... it does take a little getting used to, plus you need to confirm that both it and the rifle work OK ahead of time. Common sense really. Hope this helps. |
|
I practiced with this setup for a while, practicing reloads from both the Redi-Mag and RASE stock mags, but the whole setup was extremely heavy so I broke it down and went with a cleaner look for every day use. I keep the Redi-Mag and the RASE stock around in case I find myself in the need of an extra mag on the rifle and I can install both install in seconds if needed. The rifle was my first M4gery build and is not mine any more. BTW go to RASE Stocks, there they have guys reloading from the RASE stock in 1.5 sec or less. That's is a pretty quick reload.   |
I don't own one, but I played with one some. I noticed that you can't easily access the bolt release lever. When I reload from "slide-lock" I usually just reach up and slap the bolt release to get back in action. I can't do that with a Redi-Mag as it blocks the lever. I load just as fast from a pouch. It looks like without a lot of practice this thing could be as much a liability as an asset. I have never seen one on a military rifle of police gun. Does anyone know if this thing is "in service?" . |
|
Wow, I forgot about this thread. I have seen one or two in the field (in pictures) and I believe there was a military review (Army or USMC, I can't remember which) of items used in the field during OIF posted here awhile ago and the Redi-Mag was on that list of reviewed items IIRC. I did a search but I couldn't find the link. |
| I would suspect that if one trains with the gear they will become proficient with it accordingly. I had one, took it off, sort of regretted getting rid of it. The ONLY issue I had was the bolt release button didn't line up so I had to have a nub welded onto a release. |
Thanks. I did a search to, but couldn't find anything. Thanks for the pictures. . |
|
Lot of good info posted on this thread. Many of the guys are military, LEO, SWAT.... lightfighter.net/eve/ubb.x?a=tpc&s=7336015661&f=7206084761&m=714103883 Semper Fi Jeff |
Jeff, That's what happens when your marketing department takes your technical photos! Several serious users have identified my sole gripe with the Redimag: Weight. If I had to patrol in the boondocks with this rifle daily, I think the Redimag would go. Regardless of what you decide, the critical thing IMHO is that you train with what you are using and if you change equipment, do extra repetions DAILY to burn over the old circuits. Otherwise, you will do it wrong when SHTF. regards, southern |
AR Sponsor