AR Sponsor
Posted: 7/13/2003 11:55:46 AM EDT
 It's not much, pre-ban Colt with FN M4 upper and the rest... Enjoy and thanks, Dan |
|
Quoted: Quoted: like the green CAR stock with the black tube. What kind of vertical grip is that? yeah, what kind of handguards & how's the foregrip attached ? Looks Good! [beer] Looks like the UFIR from GG&G. Its just a simple weaver rail attached through the holes in the lower part of the handgaurd. Mine creates a little play between the two halves of the handguard, but its not too bad. What I want to know is, what brand and color of paint did you use to match the vertical grip so closely? Inquiring minds want to know.... |
|
Well the rail and the grip are from AAC...and, don't yell at me, but I painted them. I lightly sanded the stock, handguards, pistol grip and forgrip with 400 grit emery cloth, then cleaned with 91% Alcohol. Then painted with the mil-spec Krylon paint...it has held up better than I had ever thought. It's been handled alot and to the range without nary at scratch.. Thanks for the kind comments... |
|
could you tell me the stock # of that OD krylon? is it 8143? cause thats what i bought and i tested it on a spare A2 grip and its not the right color. i tried it on an old FAL grip but this time i primed it and its a little better but still not right. yours is what im after. thanks BTW: NICE RIFLE! |
|
It's Krylon #8143...I have used this paint for a long time and I have learned one thing about it....shake the snot out of it.....for at least 2 minutes..... The first time I ever used this, I didn't shake it very well and it came out looking almost like a light tan instead of OD...I called Krylon and they told me that if the can has been on the shelf for any length of time, the paint seperates and needs to be shook up..they even suggested a paint shaker to do it, like at the paint desk at Home Depot or anywhere they sell paint... HTH...Dan |
AR Sponsor