Posted: 5/26/2014 9:49:03 PM EDT
| How much do SDMR rails weigh? |
|
A few weeks ago emailed them with similar questions. Here's their reply:
General Description: Single piece Free Float rail, with single rail on the top and three permanent 2” rail sections at muzzle end. General Data: Inner Diameter: --------------------- 1.39” Outer Diameter: -------------------- 1.75” Barrel Nut: ---------------------------Uses mil-spec AR-15/M16 barrel nut Material: ----------------------------- 6061 T6 Aluminum Coating: ------------------------------ MIL-A-8625 TYPE III CLASS 2 HARD COAT ANODIZED w/Teflon Mounting screw torque spec: 8-10 ft/lbs Rail section screw torque specs: 20 in/lbs Length Rail section w/QD: ------- 3.32” Length Rail section w/o QD included: 2.25” Quick Detachment Point: -------- 5 points; 3 Muzzle End (Left, Right, Bottom) 2 Rear (Left, Right 10” SDMR Weight: -------------------------------9.42 ounces Length: --------------------------------9.76” Works with: -------------------------- Mid-Length and Carbine length gas system w/ LP gas block 11” SDMR Weight: -------------------------------~ 10 ounces Length: --------------------------------11.31” Works with: --------------------------Mid-Length and Carbine Length gas systems w/ LP gas block 13” SDMR Weight: -------------------------------11.6 ounces Length: --------------------------------13” Works with: --------------------------Rifle, Mid or Carbine Length gas systems w/ LP gas block 15” SDMR Weight: -------------------------------13.45 ounces Length: --------------------------------15” Works with: --------------------------Rifle, Mid or Carbine Length gas systems w/ LP gas block |