Posted: 5/13/2014 9:10:24 PM EDT
| Is it possible to receive just the parts without the assembly? I tried to take out the taper pins to install freefloat but could not manage to get em off.... |
|
Quoted:
No. I just got my taper pins out last night. Seemed easy to me. Make sure the upper has no play and is sitting level (I used 2x4s) and get a wide punch to get things started. 2 moderate blows with a regular hammer and mine were out. yea you cant. i've not ever nocked out taper pins, and have wondered how hard it would be. glad to hear it wasnt too bad. |
|
Quoted:
Drive them out to the ejection port side. Quoted:
Quoted:
I took the taper pins out of my PSA upper a few months ago and it was easy. OP, are you sure you're trying to pound them out the right direction? Drive them out to the ejection port side. yea that would be the way to do it. HOpefuly op is trying it that way. id hate that hes driving them the wrong way. |
|
Quoted:
use a small sledge and an oversized punch to get it started I usually wrap the upper in a towel and knell down with one foot on thee barrel and wack away (the taper pins are thicker on the ejection port side) i'd probably do a combo if it were me, towels, vice , wood etc. |