Posted: 8/17/2017 2:55:33 PM EDT
| I posted this over on the 65 Grendel forum, but I thought I would try over here as well. i just ordered a complete 6.5 Grendel and for some reason decided to order the 5.56 barrel and bolt assembly. Now I am wondering how easy it is to actually swap the 6.5 barrel over to the 5.56 barrel. I am guessing it's not something you do on a regular basis. Should I just call and cancel the barrel and bolt? Thanks for the help. |
|
Quoted:
I posted this over on the 65 Grendel forum, but I thought I would try over here as well. i just ordered a complete 6.5 Grendel and for some reason decided to order the 5.56 barrel and bolt assembly. Now I am wondering how easy it is to actually swap the 6.5 barrel over to the 5.56 barrel. I am guessing it's not something you do on a regular basis. Should I just call and cancel the barrel and bolt? Thanks for the help. A couple minutes. Only difference between swapping a tOBR barrel and these barrels is that you have to hit 4 bolts to take the handguard off. |
|
Quoted:
Thanks guys! Any suggestions for a good device to hold it in a vice? 
|
|
+1 on the bev i think it works better than holding the upper reciever and does not matter what the outside profile is either.
|