Posted: 11/19/2014 11:10:25 PM EDT
|
after receiving my shiny new T1 and mount combo from larue and
realizing that the dot was not in fact deformed or broken, just my eyes, I have now realized that there is a small amount of play in the mount when locked down. By small I mean if I take the upper off and grab the t1 I can feel movement. Should I try to tighten the bolt? Should there be zero movement even when intentionally trying to move the mount? thanks for any help |
| Isn't there an adjustment nut? Or Allen screw? If that's the bolt you are talking about, then yes. Open lever and turn nut (or screw)a very little. I believe the instructions say 1/8 of a turn. Close the lever. Check it. Open. Adjust. Rinse and repeat. I adjusted mine so that it takes some pressure to close the lever. |
|
Does it feel like the T-1 is loose on the mount or is the mount loose on the upper ?
Or is the movement between the upper and lower? Are you putting this on a LaRue rail product? Bottomline: There should be no movement. I put a LT T-1 mount on a brand x AK rail and it was a terrible fit. The AK rail was not to spec. |