Posted: 12/7/2010 6:45:47 PM EDT
|
I just traded for a DPMS SASS and need to mount a scope. I have a Vortex Viper 6.5-20x44 with a 30mm tube.
I think I need one of your LT-104 mounts. Are they all the same? If they come in different heights or eye relief's I will look up the specs on the scope. Thanks, Jim |
|
I've got the same piece. I went with the SPR 1.93 (LT135) for my Konus M30. got the xtra height to clear the front flip-up sight when I've got the sunshade on.
http://stores.homestead.com/Laruetactical/Detail.bok?no=67 pardon the crappy i-phone pic, but you get the jist 
|
|
Quoted:
LT104 is the mount for you I just wonder ifthis rifle and scope combination might use the LT-158 with it's 10moa elevation? It looks like the scope height is about the same as on the LT-104, isn't it? Ny rifle has a Magpul stock if that makes any difference. Jim |
|
Quoted:
Quoted:
LT104 is the mount for you I just wonder ifthis rifle and scope combination might use the LT-158 with it's 10moa elevation? It looks like the scope height is about the same as on the LT-104, isn't it? Ny rifle has a Magpul stock if that makes any difference. Jim The LT158 is lower thn the LT104, and may not give you a proper cheek weld (especially if your stock is a PRS) |
|
Quoted:
Quoted:
Quoted:
LT104 is the mount for you I just wonder ifthis rifle and scope combination might use the LT-158 with it's 10moa elevation? It looks like the scope height is about the same as on the LT-104, isn't it? Ny rifle has a Magpul stock if that makes any difference. Jim The LT158 is lower thn the LT104, and may not give you a proper cheek weld (especially if your stock is a PRS) I am just learning all sorts of new things today. I am using an LT158 with a VX-II(2-7x) on my grendel, using an ACS. I can't tell an appreciable difference between my buddy's SPR 1.5 and my SPR S. May have something to do with the fact that he is using a CTR. I like my cheek weld in any case and I enjoy the little bit of extra adjustment it affords me. |
|
Quoted:
Quoted:
Quoted:
LT104 is the mount for you I just wonder ifthis rifle and scope combination might use the LT-158 with it's 10moa elevation? It looks like the scope height is about the same as on the LT-104, isn't it? Ny rifle has a Magpul stock if that makes any difference. Jim The LT158 is lower thn the LT104, and may not give you a proper cheek weld (especially if your stock is a PRS) My stock is a Magpul ACS stock, not the PRS. Does that make the LT-104 still the best choice? Jim |
|
Quoted:
Quoted:
Quoted:
Quoted:
LT104 is the mount for you I just wonder ifthis rifle and scope combination might use the LT-158 with it's 10moa elevation? It looks like the scope height is about the same as on the LT-104, isn't it? Ny rifle has a Magpul stock if that makes any difference. Jim The LT158 is lower thn the LT104, and may not give you a proper cheek weld (especially if your stock is a PRS) My stock is a Magpul ACS stock, not the PRS. Does that make the LT-104 still the best choice? Jim I have liked my LT158 with my ACS. My wife thinks it is too high and wants a cheek riser if she were to shoot it(she is a smaller gal). It is up to facial geometry, I like mine perfectly, someone else may think it is too high or too low. |
|
Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
LT104 is the mount for you I just wonder ifthis rifle and scope combination might use the LT-158 with it's 10moa elevation? It looks like the scope height is about the same as on the LT-104, isn't it? Ny rifle has a Magpul stock if that makes any difference. Jim The LT158 is lower thn the LT104, and may not give you a proper cheek weld (especially if your stock is a PRS) My stock is a Magpul ACS stock, not the PRS. Does that make the LT-104 still the best choice? Jim I have liked my LT158 with my ACS. My wife thinks it is too high and wants a cheek riser if she were to shoot it(she is a smaller gal). It is up to facial geometry, I like mine perfectly, someone else may think it is too high or too low. I happen to have perfect facial geometry. Hell, perfect facial trigonometry. 
I am going to mount a scope the 1" LT-104 that I forgot I had and see how it works. Jim |
|
Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
LT104 is the mount for you I just wonder ifthis rifle and scope combination might use the LT-158 with it's 10moa elevation? It looks like the scope height is about the same as on the LT-104, isn't it? Ny rifle has a Magpul stock if that makes any difference. Jim The LT158 is lower thn the LT104, and may not give you a proper cheek weld (especially if your stock is a PRS) My stock is a Magpul ACS stock, not the PRS. Does that make the LT-104 still the best choice? Jim I have liked my LT158 with my ACS. My wife thinks it is too high and wants a cheek riser if she were to shoot it(she is a smaller gal). It is up to facial geometry, I like mine perfectly, someone else may think it is too high or too low. I happen to have perfect facial geometry. Hell, perfect facial trigonometry.
I am going to mount a scope the 1" LT-104 that I forgot I had and see how it works. Jim Is said LT-104 in use? If not just call the shop and order the 30mm rings. |