Posted: 2/14/2010 4:43:21 PM EDT
| I want to throw a .30cal can on my stealth, and want to know if I need to change anything on my combo. I have a Bravo M16 BCG, and the strong buffer spring from LaRue with an H2 buffer also from LaRue. Do I need to change buffers or anything or am I GTG as is? |
|
With just a flash hider it's still pretty bright in the PVS-14. Plus I figured since I hunt hogs a lot from my RZR, and if I see one I'm shooting it may be a little more pleasent for my passenger lol, haven't found a solution for the hot brass yet; but a step in the right direction.
Also i just got the mount for the PVS out of the package, and I think there is a part missing. Ill post the picture of my aimpoint mount then the PVS, the PVS doesn't have the part on the lever that says OPEN. Is it suppost to be like that or is something wrong? 
|
That has always made me scratch my head and go, "Hmmmm. The mount for my $500 T-1 has a locking lever but the mount for my $3,600 PVS-14 does not..."  Oh well - it don't matter. I've been runnin' it for the better part of two years and it hasn't budged.  Now, back to watching mogel runs! |
|
Quoted:
That has always made me scratch my head and go, "Hmmmm. The mount for my $500 T-1 has a locking lever but the mount for my $3,600 PVS-14 does not..."
Oh well - it don't matter. I've been runnin' it for the better part of two years and it hasn't budged.
Now, back to watching mogel runs! Female mogels in a bikini top...then I'll watch! |
| I just tried mounting a 7.62SD on mine, Turns out the mount didn't have enough thread relief to make the correct shoulder to shoulder engagement> makes for a severe misalignment, and probable baffle strike! not a big deal to get fixed, but would of been a big deal if it went un noticed. Make SURE you look down the pipe once everything is setup and you have everything straight. |
|
Quoted:
I just tried mounting a 7.62SD on mine, Turns out the mount didn't have enough thread relief to make the correct shoulder to shoulder engagement> makes for a severe misalignment, and probable baffle strike! not a big deal to get fixed, but would of been a big deal if it went un noticed. Make SURE you look down the pipe once everything is setup and you have everything straight. If the interface doesn't work for both 7.62 and 5.56, then you're completely SOL, and creating a dangerous situation. |
|
Quoted:
Quoted:
I just tried mounting a 7.62SD on mine, Turns out the mount didn't have enough thread relief to make the correct shoulder to shoulder engagement> makes for a severe misalignment, and probable baffle strike! not a big deal to get fixed, but would of been a big deal if it went un noticed. Make SURE you look down the pipe once everything is setup and you have everything straight. If the interface doesn't work for both 7.62 and 5.56, then you're completely SOL, and creating a dangerous situation. The interface should of been fine, had the 1/2 x28 mount for the 7.62SD, but the way the mount was threaded coupled with the way the LT barrel is threaded, I was completely SOL and a dangerous situation would of been there had I not looked down the barrel to make sure. I should of just waited for the LT cans/ mounts to hit the website! I am very grateful, however, that I did'nt disrupt the space/ time contiunium and destroy all of humanity whilst attempting to mate LT and AAC!  Should of known better!
|
|
Quoted:
I know a fella who's running a 762SD on his OBR and his Stealth - works great! Good combo, just try another mount. I've mounted AAC on 3 Larue rifles with no problems. :) I hear that's the way to go! Just ordered some sordins, should work on anything? as long as the mechanical interface is acceptable. |