Posted: 2/15/2012 5:35:25 PM EDT
Bryan, Any news on these 
Also, are there any other (5.56) mags that will work for a function/limited test ?? Somewhere in the old thread I recall 20 round Pmags mentioned. Thanks. BGF |
|
Quoted:
Quoted:
I've had good luck with Windowed PMags and modified followers. Would you mind linking or posting more information on how this was done. I am interested in any alternative to wasting money on more ASC mags. Finally found it, http://www.ar15.com/forums/t_3_121/549032_Modded_pmags_100__reliable_for_5_45x39_russian_.html ETA: The only thing I didn't do is remove the nub on the front of the follower that allows it to pop up on all my mags. |
|
Quoted:
Finally found it, http://www.ar15.com/forums/t_3_121/549032_Modded_pmags_100__reliable_for_5_45x39_russian_.html ETA: The only thing I didn't do is remove the nub on the front of the follower that allows it to pop up on all my mags. Thanks. I'll try that with a couple Post M PMags. I'll try just about anything at this point. My success rate with ASC and Cprod mags has been right around 50%. They are too expensive for having to throw out at that rate. |
|
Quoted:
Quoted:
Finally found it, http://www.ar15.com/forums/t_3_121/549032_Modded_pmags_100__reliable_for_5_45x39_russian_.html ETA: The only thing I didn't do is remove the nub on the front of the follower that allows it to pop up on all my mags. Thanks. I'll try that with a couple Post M PMags. I'll try just about anything at this point. My success rate with ASC and Cprod mags has been right around 50%. They are too expensive for having to throw out at that rate. Out of the approximate 700 rounds I've used the Pmags with, I've only had one failure and it was a failure to hold the bolt back when I was firing the last few rounds at a rapid pace, and it was just with one mag and happened one time. I've been unable to replicate the issue. Overall, I find the Pmags to be very reliable. |