[ARCHIVED THREAD] - Expected Wait Time (Page 1 of 5)
Posted: 11/5/2008 7:16:19 AM EDT
|
Is there a general idea on the wait time of a CMMG Rifle or Upper?
Thanks |
|
10.3s have been at the chromers for a long time; I should hope they show up very soon.
U-1605s probably won't take that long, but we are quoting very conservative dates. We did have a few 14.7" M4s built up last week, but I don't know if there are any left. I do know we have 14.7" M4A1s down there. Jeff |
|
Quoted:
Quoted:
Hi Jeff, Does that also include the 16" MedCon middies? Thanks +1 I want to order a 16" Chrome-Lined Medcon Midlength, but I don't want to order if it's going to be back-ordered for weeks-months. I received my answer today via an email I sent the other week. Quoted below for the rest of you. Assuming I submit an order Friday evening, what sort of wait time would I be looking at for a 16" medcon barrel with mid gas (like SKU B-1605M)? What sort of wait time could I expect for a 18" SPR barrel with rifle gas (like SKU B-1808R)?
Thank you. -KJA Most orders are taking approximately 21 days to fulfill. We currently have 18" barrels in stock, the 16" medcons are out for the next 6 weeks or so. |
|
Quoted:
Quoted:
Quoted:
Hi Jeff, Does that also include the 16" MedCon middies? Thanks +1 I want to order a 16" Chrome-Lined Medcon Midlength, but I don't want to order if it's going to be back-ordered for weeks-months. I received my answer today via an email I sent the other week. Quoted below for the rest of you. Assuming I submit an order Friday evening, what sort of wait time would I be looking at for a 16" medcon barrel with mid gas (like SKU B-1605M)? What sort of wait time could I expect for a 18" SPR barrel with rifle gas (like SKU B-1808R)?
Thank you. -KJA Most orders are taking approximately 21 days to fulfill. We currently have 18" barrels in stock, the 16" medcons are out for the next 6 weeks or so. Thank you for posting that. I'll plan accordingly. :) |
|
We have M18s on hand.
Front sight bases for the lightweights are getting cut now, so figure 4-6 weeks. MedCon 16s and 20s are at chrome, so no ETA, sorry. 7.3s are at MP testing, but are all spoken for. We should have more heading to chrome in the next couple of weeks. Thanks, Jeff |
I would get my name in the hat. Your card won't be run until it goes into production. We have a few hundred orders pulled that we have everything in stock, but haven't run the cards yet because we are limited on production. 
Its always something. SST MedCons are out right now. I can try to get an ETA next week on them. I had the guys downstairs to push through some 14.5" SOCOM and 11.5" MedCons too; we've been out of those for quite awhile. 7.3s are coming back from MP testing tomorrow and hopefully the 10.3s and 11.5s are right behind. Chromers did send some 20ers to MP test, but I don't know if they were the gov't or ltwt. I know it was not medcon. Jeff |
|
Quoted:
7.3s are at MP testing, but are all spoken for. We should have more heading to chrome in the next couple of weeks. Thanks, Jeff Jeff, Pardon me for not understanding 100%, but about the 7.3s, I don't quite understand what you mean. I understand what MP testing & chroming is, but I don't understand when they will become available for ordering or how long I would have to wait to get one. Can you clarify for me? |
|
Quoted:
Jeff, Pardon me for not understanding 100%, but about the 7.3s, I don't quite understand what you mean. I understand what MP testing & chroming is, but I don't understand when they will become available for ordering or how long I would have to wait to get one. Can you clarify for me? Probably means that all the 7.3s they have coming in are already sold. Since we're asking, any updates on the 14.5" mids? |
That is right, all 7.3s that came in today (woo-hoo) are already spoken for  More are in the works though.
A3s are in stock and good to go. No ETA on 14.5" mids, sorry. 1604s are on hand, but it will take 3 weeks to fill. Lowers in any configuration are in short supply right now, and I am having a difficult time gauging inventory due to the massive increase in orders. Sorry to not have a more definitive answer on that. Jeff |
|
I am ready to order now, I am just waiting to get areply back from an email I sent a couple days ago, but it looks like you have been checking on here pretty regularly jeff so I''ll just ask on here as well.
I am ready to order a 5.56 upper right now, and my main goal is to have it before the end of January... My uppers of choice are in this order: 1. 14.5" mid-length, gov't profile, with Phantom 5C2, Full-Auto Carrier 2. 16" mid-length, gov't profile, with Phantom 5C2, Full-Auto Carrier 3. 14.5" Carbine, gov't profile, with Phantom 5C2, Full-Auto Carrier 4. 16" Carbine, gov't profile, with Phantom 5C2, Full-Auto Carrier So which complete upper assy would you say is most likely to be good to go the soonest and what kinda ball-park are we talking about ETA wise. Thanks for your time Jeff. |
|
Hey,
I placed an order yesterday for a 16" mid-length upper with a few upgrades... I was wondering what the estimated wait time would be? Also, I accidentally selected the wrong rail (I selected the standard when I meant to select the light-weight)... How is the best way to try to correct that? (I sent an email about it but not sure if that's the proper procedure). Thanks, I appreciate it! |
|
Quoted:
MedCon 16s and 20s are at chrome, so no ETA, sorry. Thanks, Jeff Well, I decided I was set on the 16" MedCon Mid-Length (1605M) set up and just placed an order. Here's hoping the chromers get their butts in gear. 
Looking forward to it whenever it gets finished. |
|
Quoted:
Quoted:
Just ordered a stripped 18" SPR barrel with mid gas. I got a shipping notification from UPS earlier tonight. Just a little bit faster than that 3 weeks you guys quoted via email. Barrel arrived on Tuesday afternoon. Looks great, can't wait to finish putting this upper together. |
|
I had the guys downstairs to push through some 14.5" SOCOM and 11.5" MedCons too; we've been out of those for quite awhile.
Darn. I ordered an upper with a 14.5" SOCOM about a week ago, was told they're still in chrome. So there's no telling how long the darn chromers will take? |
|
Quoted:
4. 16" Carbine, gov't profile, with Phantom 5C2, Full-Auto Carrier So which complete upper assy would you say is most likely to be good to go the soonest and what kinda ball-park are we talking about ETA wise. Thanks for your time Jeff. In stock, looking at about a month's time for the build. Quoted:
do you have any 14.5 Lightweight CAR w/Permanent Hider Barrel SKU Number:B-1454HL in? I want to place a order but would like to know if you have any first. Sorry, we are out. Quoted:
Hey, I placed an order yesterday for a 16" mid-length upper with a few upgrades... I was wondering what the estimated wait time would be? Also, I accidentally selected the wrong rail (I selected the standard when I meant to select the light-weight)... How is the best way to try to correct that? (I sent an email about it but not sure if that's the proper procedure). Thanks, I appreciate it! We are getting pretty thin on finished inventory on the mids, but have more at chrome right now. I would say 8 weeks. Quoted:
14.7 MOD4A1 (SOCOM) w/A2 flash hider? Are these available or will they be available in the forseeable future? Thanks! In stock, 4 weeks delivery. Quoted:
Quoted:
MedCon 16s and 20s are at chrome, so no ETA, sorry. Thanks, Jeff At whatever point 20" MedCons show up, do you expect to have enough to fill currently outstanding orders? We have more than enough in production, so there will actually be an excess inventory on hand. Quoted:
I ordered a 1604A1 and 1605 upper on Nov 3rd. Card was charged the day I ordered. Its on its way?.........I hope. Yours will be in production and will probably be heading out next week. Quoted:
I had the guys downstairs to push through some 14.5" SOCOM and 11.5" MedCons too; we've been out of those for quite awhile.
Darn. I ordered an upper with a 14.5" SOCOM about a week ago, was told they're still in chrome. So there's no telling how long the darn chromers will take? No, sorry. Jeff |
As is the great customer service.
|
Nothing on the 20"A2s, sorry.
18"ers are on hand and are in production. Build times have gone from 2-3 weeks to 6-8 though. We have hired an additional 6 full timers in the last 4 weeks to help with orders. We are using the same assemblers for barreled uppers, and our QC process is still in place, but due to volume, everything is taking longer. Thanks, Jeff |