Posted: 12/10/2013 7:05:29 PM EDT
|
is this normal or in your opinion in "acceptable" condition as a blem?
I tried email BCM 4 times since the 4th with my order # and contact info but never got a reply what so ever. the 3" long mark on is all the way through the anodizing surface down to the bare aluminum. I took 2 pictures one with flash, another without. http://i1318.photobucket.com/albums/t649/mdwstddm4/vlt/IMG_0316_zpsc2e0195b.jpg http://i1318.photobucket.com/albums/t649/mdwstddm4/vlt/IMG_0314_zpsa5c1caaf.jpg |
|
Quoted:
dudes, I'm just asking, I know what "blem" means. if that's normal, move on. if not, than I'll give them a call. simple as that. I've ordered "blem" items before from various vendors, never got anything with that much of damage to the hard anodizing. Quoted:
dudes, I'm just asking, I know what "blem" means. if that's normal, move on. if not, than I'll give them a call. simple as that. I've ordered "blem" items before from various vendors, never got anything with that much of damage to the hard anodizing. BCM Blems are not PSA or other company manufacturing blems where there are slight defects in finish or coating. They are demos and test uppers that have been used and broken down, they will have marks and show use. Per their site: M4 Flat Top Upper Receiver with cosmetic blemishes. Most have scratches or scuffs.
The upper comes unassembled, but complete with BCM forward assist assembly and ejection port cover door assembly. You must assemble it. (Assembly required) (all parts, but you will have to assemble together) THESE ARE USED/DEMO UPPER RECEIVER ASSEMBLIES. Many have had a barrel mounted, and used as display model. All will have several nicks, scratches, and marks on exterior finish. NO HANDPICKING. This receiver has the M4 feedramps machined in. This is to be used with barrels that include the M4 barrel extension. Milspec Hard Coat Anodizing. Manufactured by USGI Contractor. |
