Posted: 5/18/2014 10:47:20 AM EDT
|
Id like to send 2 AR-15 barrels to you guys to shorten. One is a LMT 16" .223/5.56 and the other is a Colt 16" 9mm. I would like both to be cut to 10.5 with the FSB left in place. Is the correct service just barrel threading at $65 each or am I missing something there? Also can I get the barrel "ends" that were chopped off sent back as well? Id like to have them either as paperweights or as evidence that the barrels were OEM in case I ever want to sell them. Thanks!
|
|
Id like to send 2 AR-15 barrels to you guys to shorten. One is a LMT 16" .223/5.56 and the other is a Colt 16" 9mm. I would like both to be cut to 10.5 with the FSB left in place. Is the correct service just barrel threading at $65 each - Yes, $65 if you send the barrels removed from the receivers. Also, keep in mind we measure from the bolt face, so those 2 barrels will have a different OAL, with both cut to 10.5". Also can I get the barrel "ends" that were chopped off sent back as well? Yes, but put a big note in the box that you want the stubs back. We usually just throw them out. |