Posted: 12/31/2013 3:27:33 PM EDT
|
Hey, I had you guys thread and extend a CZ75B barrel for me a few months ago, and you did a great job.
I was shooting it a week or two ago with a suppressor mounted, and my shots were off by about three or four feet at 40 yds. I didnt have any baffle strikes or anything like that. I pulled the can off and it shot to point of aim. I noticed the slide was a little sluggish going into battery, so I looked a little closer and noticed that where the thread extension meets the barrel, some material had pushed out. I realized right away that I must have torqued it down too tight and did the damage to it. Im just glad I didnt get any baffle strikes. I love this gun and fitting CZ barrels is a pain in the ass. Can I send you the barrel back and have you guys put another extension on it (and true the shoulder if I messed that up too)? Ill gladly pay for a new threading/extending job. I just want to unfuck my poor CZ. 
|
|
Look under "services" on their site, it was under 200 bucks for each of mine. Its really the only way to go with the CZ's.
I try to get everything threaded, and the CZ's came out very well. The SP01's are a better candidate because they have thicker barrels (.550 O.D.) but the regular 75B is a great host. Well, as long as you dont wrench down on the extension too hard. 
|