Quoted:
Hey guys, I read your thread about ordering shop services. I have some questions.

I'm planning on sending a barrel to get an FSB mounted. I have the barrel, appropriate sized FSB, and delta ring/ barrel nut assy. My first question is, I noticed on your site that with the install job, I can upgrade to taper pins for $15. While I know what a taper pin is, what's the difference vs the regular straight pins you use? ETA: what is the benefit of going with taper pins?  Taper pins are the standard for FSB install. We have not had any issues with our straight pins, that i know of, so it is simply if you want your FSB as close to "factory" looking as possible.

Second, I forgot to get a Front hand guard retaining ring. Will that be an issue as far as the install goes?  Not as far as the install goes, but you will be required to remove the FSB, so i would suggest that you note in the Special Instructions box, at checkout, that you WILL be using a HG cap, and that you would like the FSB to be left loose, for removal. Or, request one be installed (please note round or triangle) for $5.

Third, (and I realize this is a pretty stupid question even as I type it) do you have any idea when you might be getting nsm blackout FHs in? My barrel is 14.5, so I need to have my muzzle device permed before I can throw it on my rifle. Luckily, I have an AR pistol, having the short barrel lying around is a non-issue. However, it would simplify matters if I could have all the work done at once. I will try to remember to check availability.

And lastly, can I order in-stock items, specifically, a gas tube and pin, when I place my online order for shop services, and have it ship with the barrel when you return it? Yes, just note to ship with Shop work.

Thanks in advance for your help, I know you guys are swamped right now.