Posted: 12/8/2011 2:37:47 PM EDT
|
Hey guys,
Finally sending in my 700 barreled action for some much needed barrel work. Looking to cut back to about 21" and thread 5/8x24 for an AAC muzzle brake. Does the 140.00 service include timing/mounting the brake? I would prefer to not use the shims, if possible. Also, do you guys need the bolt when cutting back the barrel? Thanks! Thomas |
|
There is a $20 up-charge for timing muzzle device with shoulder ( no shims) on those. So when you order, note in Additional Instructions box, at checkout, to time muzzle device on shoulder, without shims, and install -$20 per Dave. We will add to total at processing.
We do not need your bolt. Thank you. 
|