Posted: 8/31/2014 6:23:20 PM EDT
Pros: -The friction lock springs keep it tight on the extension -Collapses fully -Compatible with ASAP and QD end plates -Dual QD sling points and 2x traditional sling attachment points -Nice angle on the rubber butt pad for use with armor/gear Cons: -Maybe lack of battery storage? I really can't think of any cons.... The stock essentially is in between the CTR/MOE stock and the B5 Systems SOPMOD Bravo in terms of cheek weld (see the measurements in the video). So, it gives a little more cheek weld while remaining relatively sleek in profile. For the details on the stock, comparisons between several on the market, and to see it in action check out the video below: 
|
|
Saw the review on the SL Handgaurd and the SL Stock. Will be getting both for current and future Carbines.
I see you have the Slim Line Grip Also. Any info you can offer would be good on the Grip??? Maybe a quick all in one review of all 3 or video review!!! I had the K2 grip and it seemed to big, almost as if it got it the way. K grip is a little too small. Supposedly the SL grip is between a K and K2 grip. |
| The MOE SL is indeed between a K and K2 dimensionally. Think of it as roughly the width of a K grip but with a side profile closer to the K2, minus the small hump near the top of the back strap. If you thought the K was too small and K2 was too big, this sounds like it might be right up your alley. |
|
Quoted:
The MOE SL is indeed between a K and K2 dimensionally. Think of it as roughly the width of a K grip but with a side profile closer to the K2, minus the small hump near the top of the back strap. If you thought the K was too small and K2 was too big, this sounds like it might be right up your alley. I do have the SL grip. The description above is spot on, couldn't have said it better myself. |
|
Quoted:
Yes, I just received the MOE SL. I like the SL better because it locks tighter on the buffer tube and the cheek to stock weld feels better. I really like the overall shape of the SL as well. Quoted:
Quoted:
Are those both yours? If so, which is your fav and why? Yes, I just received the MOE SL. I like the SL better because it locks tighter on the buffer tube and the cheek to stock weld feels better. I really like the overall shape of the SL as well. Does the SL scratch your buffer tube at all with those metal skid springs on the inside? |
|
Quoted:
Does the SL scratch your buffer tube at all with those metal skid springs on the inside? Quoted:
Quoted:
Quoted:
Are those both yours? If so, which is your fav and why? Yes, I just received the MOE SL. I like the SL better because it locks tighter on the buffer tube and the cheek to stock weld feels better. I really like the overall shape of the SL as well. Does the SL scratch your buffer tube at all with those metal skid springs on the inside? None so far, I just set it to length and leave it though. Fits tight on the A5 too. |
