Posted: 2/18/2008 12:35:43 PM EDT
| I tried installing my MIAD grip last night. It came with a shorter flathead screw chrome in color with a dab of red loctite on the end. Wehh I tried to instal the screw into my Spikes lower and it wouldnt make any progress into the receiver. So I removed the grip and just tried starting the screw into the lower without the grip in place and it still wouldnt accept. I than tried the grip screw that came with my RRA LPK it a black in color screw with a hex head attachment and it worked but the only problem is my hex wrence is an L- shaped one and wont fit into the bottom of the grip. I was basically just courious why the grip screw provided by Magpul was not working. Ive never read any posts before about these kinds of problems. Any help would be appreciated. |
| was it a new lower or did it previously have a gri on it? I had issues startin one of mine so i pulled the grip off ran the hex head in the reciever a few times, it was a lil tight then tried the magpul screw the locktight came off but it went in so i put the miad back on. |
