Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
3/10/2009 9:48:44 PM EDT
Hi here is the problem when trigger is pulled bullet dont go boom not all the time about every 3 to 5 rounds
if you reload the bullet that did'nt go boom and pull trigger bullet goes boom


now this is'nt a mag or ammo problem AK will shoot every time same ammo lot its a problem with father in laws mini 30 ruger
now gun was bought in 1991 shot it 1st time this week now it was clean and lube to spec gun is like new

my ideal hammer spring is week from sitting for years please help my father in law would like to shoot his gun


Thanks
3/10/2009 9:54:32 PM EDT
[#1]
LOL QUE?
3/10/2009 9:54:45 PM EDT
[#2]
ENGLISH motherfucker! Do you speak it?!
3/10/2009 10:00:12 PM EDT
[#3]
i see words backwards and have a hard time wrighting so sorry iam not a dumb ass and work hard and not some dumb ass lib so sorry i did'nt make it where you could read it well just needed help asshole
3/10/2009 10:02:07 PM EDT
[#4]
Guys, stop giving him a hard time.  

OP, I think you could use one of these.  Hope it helps.  
3/10/2009 10:03:34 PM EDT
[#5]
thank you
3/10/2009 10:03:59 PM EDT
[#6]
Quoted:
Guys, stop giving him a hard time.  

OP, I think you could use one of these.  Hope it helps.  


Fuck that. He called us assholes.  He could at least use periods.
3/10/2009 10:04:50 PM EDT
[#7]
Replace the hammer spring, make sure the firing pin is moving fully forward with proper protrusion and is not broken.

They are pretty rudimentary and this should fix the problem.
3/10/2009 10:05:32 PM EDT
[#8]
Quoted:
Guys, stop giving him a hard time.  

OP, I think you could use one of these.  Hope it helps.  



Agreed and I concur.
3/10/2009 10:13:08 PM EDT
[#9]
Thanks for the help
3/10/2009 10:20:54 PM EDT
[#10]
Holy moly. You are a very dumb person.
3/10/2009 10:26:12 PM EDT
[#11]
Quoted:
ENGLISH motherfucker! Do you speak it?!



No Shit!!

3/10/2009 10:51:06 PM EDT
[#12]
Field strip the bolt. Make sure it is good and clean inside and out. Clean the chamber. Make sure the bolt is going fully into battery. As mentioned above, check the condition of the firing pin. Also as mentioned above, replace the hammer spring.(cheap insurance)