Posted: 7/28/2007 8:35:41 PM EDT
|
I'm spread pretty thin. I just got an LRB M25 that Ive been waiting on for 7 months. Have an M1 that I started as a stripped barreed reciever from the CMP and have been aquiring NIW parts. All I need is to order a stock set from DGR and it will be finished. I picked up a M700 SPS Varmint in .308 and replaced the stock with a HS Precision I found on eBay, it needs a scope and I bought an old beat up Mossberg 22 with a mannlicher style stock. It has a crack that needs pinned and really needs some TLC. And I have a match with the rifle team on Saturday that I have not even begun to prepare for. And I am gearing up to relaod 308. Then archery will be here in a couple months along with all the opther hunting seasons.. I feel ..... overwhelmed 
|
Who has LC 7.62 brass for a good price these days? I remember a couple years ago when i was contemplating an M14 clone but was elbows deep in the AR's and M1 the stuff was everywhere and cheap. |
.308 brass is getting hard to find, I'll keep a look out for you |
Thanx. I see it on eBay but it is going for .50 per round.. For one empty casing!! |
|
Saiga 12 needs a pistol grip/folder FAL needs a para conversion and a flash hider that's not a foot long Colt lower needs to be SBRed so I can start buying new uppers or at least this is the stuff I would be working on if I hadn't lost it all in a tragic boating accident 
|
|
-Beretta 92G Elite 2 suppressed. I have a factory 92FS INOX barrel threaded. -Tactical Solutions 1911 conversion suppressed on a Caspain Recon frame. Just waiting on Tac-Sol to start shipping the conversions. My next 3 projects: -Rem. 700 with standard weight bbl cut down to 16" and threaded, Hogue OM stock, YHM 30QD suppressor, Leupold optic. -10/22 decked out with all the "gnat's ass at 50yds" trimmings. Threaded bbl of course. -Self-built M1A bush. Gonna have a standard barrel cut down to 18" and rethreaded for the YHM QD adapter. After those projects, I'll stop until the Masada comes out... then I'll get one in the SBR flavor, and use the YHM 30QD can on it. |
Damn you!!!! I must do that when I turn 21 
|
|
AR545 conversion (needs to be test fired and if all goes well, refinished) Ak74 kit build Garand: .. replace gas piston .. replace barrel .. reparkerized .. refinsh stock Finish Para conversions on two FN GunKote two other FNs Gunkote three M98 Mausers Replace rear sight on Ballester Molina Gunkote two 1911s |
Ya think???!!!! Don't 944s have the tranny in back? You're not turning the GTI into RWD, are you? Aren't 84 VWs worth about 200 bucks? You do realize Porsche is probably the most difficult brand on the planet to work on, right? That is one hellacious monkey you're attempting to fuck! Good luck, and post pics!
|
944 Has A Transaxle- Yes. RWD? -Yes. GTi Value- Really variable. As for the difficulty of working on P-cars: I have some very Porsche savy resources to tap. And what's a project without some challenge involved?  And you'll have to wait on pics. So far it's just a shit-ton of Porsche parts, a partially stripped 944 engine on a stand and a GTi sans metal lump up front. |
|
Finally got my Dillon 650 all set up for 5.56. I've fully processed and loaded 30 rounds and tested them. I've got around 250 that have been sized, deprimed, trimmed and deburred and dropped into a case gauge. I did those during the setup phase. Now I should process the massive quantity of brass that I've collected, tumbled and sorted. I probably have about 5K usable brass. I'm debating whether to even bother with the Guat. Besides that, I need to get a 9mm upper and a few other components for a 9mm build. Also, I'm considering another 10/22, but this time built from a bare receiver. I wish GM made threaded barrels. I'm contemplating getting a .22 can and a .30 cal can. Maybe an AOW shotgun... |