Posted: 2/8/2017 6:33:15 PM EDT
| Hoping someone here can figure this out. 02 Silverado with Fisher MM1 (pretty sure) everything seems to work but turn signals/park lamps. Traced wires and discovered a purple,reddish pink and brown wire on the driverside going nowhere and a purple on passenger side. Looking over Fishers wiring schematics it looks like the purples are for the turns, brown is parks and pinkish one is for drl's. Sounds like i directly splice these into existing harness but where? Tryed the turns on all the wires and no luck. |
|
When I did fishers years ago, they supplied bullet connectors that clipped onto the existing stock harness wires, then you plugged the plow light wire into it..on those chevies, pull the pins holding the headlights, then unclimbed the turn signal housing and pull it out enough to reach the wires...figure out which wire is the left and right turn and clip on the connectors...
Here is one of the clips.. Attached File |