Could You Have Stopped This? Vegas Shooting Analysis with Attorneys on Retainer

[ARCHIVED THREAD] - Just obtained

Posted: 4/21/2003 2:16:41 AM EDT

I just obtained a nice colt pre ban lower. It has small pins but the front is a screw in. Can I have a regular push pin installed in its place?

Posted: 4/21/2003 2:19:56 AM EDT

[#1]

Does it have a very small hole on the raised portion of the right side?

Posted: 4/21/2003 2:24:07 AM EDT

[#2]

No!

Posted: 4/21/2003 2:50:28 AM EDT

[#3]

Someone can still possible drill it for the detent to fit in place.

Posted: 4/21/2003 3:01:03 AM EDT

[#4]

Its going to the gunsmith today to have the trigger worked. I will have it done Thanks

Posted: 4/21/2003 3:17:52 AM EDT

[#5]

erm

is the front hole also small, or is it oversized? (all the 'screw' type I have seen have been)

If it is oversized you need to get a offset screw thing if you want to use a mil-spec upper.

Posted: 4/21/2003 3:33:43 AM EDT

[#6]

Its a small hole front piviot pin only its screw type. I also have a Colt light weight slabside lower with large hole. I shopped for this lower with raised fence and small hole and small fire control pins for my M4gery project. The push pin front is nice for quick break down.

[ARCHIVED THREAD] - Just obtained

Warning

Confirm Action

[ARCHIVED THREAD] - Just obtained

[ARCHIVED THREAD] - Just obtained