Posted: 7/9/2012 3:50:01 PM EDT
| I have a 10000 gallon pool that even though I fill it with high PH water the Ph falls to about 6.5 after a week or two. I have kept pool for about 10 years and never had a problem like this. My PH bounce in the past allways ended up on the high PH side. I had it balanced for awhile and we got a turd floater of a rain the next day I checked the PH and it was low again. Any ideas? |
|
Quoted:
Quoted:
What's your alkalinity like? Good question my reagents in that kit are dead. I am using a Leslies basic kit at the moment. Well, if you alk is way out of range (70-120 ppm) then you will have a lot of trouble balancing your ph. if thats the case your gonna have to crash the alyk and then bring it back into the propper range first. |
|
Quoted:
Quoted:
Quoted:
What's your alkalinity like? Good question my reagents in that kit are dead. I am using a Leslies basic kit at the moment. Well, if you alk is way out of range (70-120 ppm) then you will have a lot of trouble balancing your ph. if thats the case your gonna have to crash the alyk and then bring it back into the propper range first. Thanks |