Posted: 2/29/2012 1:05:16 PM EDT
|
My DSA STG58 firing pin broke. It was a 2 peice firing pin. the only replacements i could find were single peice firing pin. my FAL is a Metric pattern and the firing pin was for a metric rifle but the firing pin does not fit my bolt... FFFUUUUUUUUUUCKKKKKK!!!!!!
It seems to fit just with out the spring. I assume i just need to order a new spring too? So. what do i need to do here? it looks like the spring legth is just diffferent. any reason i cant trim this spring back? |
|
The DSA Metric Two Piece Firing Pin - 037A entry is about as confusing as it gets-
Detailed Description
Metric Two Piece Firing Pin. U.S. Manufacture 
May or may not be what you want. 
They may have just copied the illustration from the 037 one piece firing pin. |
|
Quoted:
The DSA Metric Two Piece Firing Pin - 037A entry is about as confusing as it gets- Detailed Description
Metric Two Piece Firing Pin. U.S. Manufacture http://www.dsarms.com/images/037A.JPG May or may not be what you want.
They may have just copied the illustration from the 037 one piece firing pin. What your looking is is what i bought. Unfortunately the spring for that peice is shorter than the spring for the two peice pin. I just snipped the longer spring down to size and it seems to work fine.... |