Posted: 3/23/2014 12:29:15 PM EDT
|
...that would match a brushed stainless Kayfun 3.1
Clone is fine Unrelated question. I know someone has mentioned they have a ring for their Provari that makes it look more flush. Has anyone seen one made for the Vamo? |
|
Quoted:
...that would match a brushed stainless Kayfun 3.1 Clone is fine Unrelated question. I know someone has mentioned they have a ring for their Provari that makes it look more flush. Has anyone seen one made for the Vamo? Not sure on the match you're looking for. My stainless Vamo matches my Kayfun pretty will finish-wise, and width-wise. As for the flush ring for the Vamo, if you find one, let me know. That's what I really want, too. I'm sort of surprised no one makes one. If you're crafty, you can pick up a replacement battery extension tube and cut it down to size, since they thread on the top just fine. |
|
This place has all the Vamo parts, including the extension tubes, and is the website I always see recommended on ECF for said parts: http://www.ecigaretteimpressions.com/accessories/vamo_body_parts.php
I'm pretty close to picking up a spare tube and seeing how steady my hand is with a dremel. 
|
Hcigar Nemesis clone matches pretty damn well. 
ETA: My 3.1 is the Hcigar version. Which i kinda with i had not purchased, nothing wrong with it other than i wish it was a different finish.
The Tobeco lite plus matches the finish perfectly. Both obviously sit flush and are the same diameter. |
|
1. -- You know you have a severe case of BRD ... when you realize the AR you bought yesterday has the same serial number as the one you sold last year. 2. -- You know you have a severe case of PVD ... when you catch yourself looking for a mod that will perfectly match the finish and OD of your Kayfun 3.1 . <---- Done both.
|
|
Quoted:
1. -- You know you have a severe case of BRD ... when you realize the AR you bought yesterday has the same serial number as the one you sold last year. 2. -- You know you have a severe case of PVD ... when you catch yourself looking for a mod that will perfectly match the finish and OD of your Kayfun 3.1 . <---- Done both.  
|
|
Quoted:
Hcigar Nemesis clone matches pretty damn well.
http://i135.photobucket.com/albums/q154/lcoates33/20140323_171710_zpsbumtxl6f.jpg ETA: My 3.1 is the Hcigar version. Which i kinda with i had not purchased, nothing wrong with it other than i wish it was a different finish.
The Tobeco lite plus matches the finish perfectly. Both obviously sit flush and are the same diameter. That looks good and what I'm looking for |
|
That dosen't look bad either. 
|
|
Magneto mod from SMOK, is pretty much perfect.
http://www.google.com/url?sa=i&rct=j&q=&esrc=s&frm=1&source=images&cd=&cad=rja&uact=8&docid=InTsdiH1nPhyDM&tbnid=JWkQNEPrVv8hSM:&ved=0CAYQjRw&url=http%3A%2F%2Fxn--42cg9cuaawc1dd7ebb6a2b1nncjl.com%2Fboard%2Findex.php%3Ftopic%3D529.0&ei=O5EvU9qmM4uyqQH2qIHADg&bvm=bv.62922401,d.aWc&psig=AFQjCNExbx-TNEF_lGzRE7Q-yoOrkuV2uw&ust=1395712524691543 Left cold it aint my pic. |
|
Quoted: Hcigar Nemesis clone matches pretty damn well. http://i135.photobucket.com/albums/q154/lcoates33/20140323_171710_zpsbumtxl6f.jpg ETA: My 3.1 is the Hcigar version. Which i kinda with i had not purchased, nothing wrong with it other than i wish it was a different finish. The Tobeco lite plus matches the finish perfectly. Both obviously sit flush and are the same diameter. My Siglieli is ticking me off. You'd think with just one button, it would be fine, but it seems to have a problem where sometimes it detects multiple presses when I'm only pressing once to fire it, and it ends up going into settings for various things. It's actually getting difficult to vape with it at all because the button is so faulty. Seriously... It's a damn button.  |
|
Quoted:
How are these mods? My Siglieli is ticking me off. You'd think with just one button, it would be fine, but it seems to have a problem where sometimes it detects multiple presses when I'm only pressing once to fire it, and it ends up going into settings for various things. It's actually getting difficult to vape with it at all because the button is so faulty. Seriously... It's a damn button.
Quoted:
Quoted:
Hcigar Nemesis clone matches pretty damn well.
http://i135.photobucket.com/albums/q154/lcoates33/20140323_171710_zpsbumtxl6f.jpg ETA: My 3.1 is the Hcigar version. Which i kinda with i had not purchased, nothing wrong with it other than i wish it was a different finish.
The Tobeco lite plus matches the finish perfectly. Both obviously sit flush and are the same diameter. My Siglieli is ticking me off. You'd think with just one button, it would be fine, but it seems to have a problem where sometimes it detects multiple presses when I'm only pressing once to fire it, and it ends up going into settings for various things. It's actually getting difficult to vape with it at all because the button is so faulty. Seriously... It's a damn button.
I have had zero issues with the Hcigar clones. I got to play with an unknown clone from fasstech at a local shop, and i can tell you there is a difference in the construction. Especially the 510 area, and the pins. The switches were pretty similar, but i have the magnetic switch in mine, so in all fairness i really couldn't say which one is better in it's stock form. Threads and finish are pretty even, but the engraving on the unknown clone sucked to put it bluntly. |
|
Quoted:
I have had zero issues with the Hcigar clones. I got to play with an unknown clone from fasstech at a local shop, and i can tell you there is a difference in the construction. Especially the 510 area, and the pins. The switches were pretty similar, but i have the magnetic switch in mine, so in all fairness i really couldn't say which one is better in it's stock form. Threads and finish are pretty even, but the engraving on the unknown clone sucked to put it bluntly. Quoted:
Quoted:
Quoted:
Hcigar Nemesis clone matches pretty damn well.
http://i135.photobucket.com/albums/q154/lcoates33/20140323_171710_zpsbumtxl6f.jpg ETA: My 3.1 is the Hcigar version. Which i kinda with i had not purchased, nothing wrong with it other than i wish it was a different finish.
The Tobeco lite plus matches the finish perfectly. Both obviously sit flush and are the same diameter. My Siglieli is ticking me off. You'd think with just one button, it would be fine, but it seems to have a problem where sometimes it detects multiple presses when I'm only pressing once to fire it, and it ends up going into settings for various things. It's actually getting difficult to vape with it at all because the button is so faulty. Seriously... It's a damn button.
I have had zero issues with the Hcigar clones. I got to play with an unknown clone from fasstech at a local shop, and i can tell you there is a difference in the construction. Especially the 510 area, and the pins. The switches were pretty similar, but i have the magnetic switch in mine, so in all fairness i really couldn't say which one is better in it's stock form. Threads and finish are pretty even, but the engraving on the unknown clone sucked to put it bluntly. Got two of the Hcigar nemesis clones with the fat daddy reduced throw pin and magnets. Side by side with a buddy's real one the clones looked just as good and the switches worked better.
|
|
Quoted:
Got two of the Hcigar nemesis clones with the fat daddy reduced throw pin and magnets. Side by side with a buddy's real one the clones looked just as good and the switches worked better.
Quoted:
Quoted:
Quoted:
Quoted:
Hcigar Nemesis clone matches pretty damn well.
http://i135.photobucket.com/albums/q154/lcoates33/20140323_171710_zpsbumtxl6f.jpg ETA: My 3.1 is the Hcigar version. Which i kinda with i had not purchased, nothing wrong with it other than i wish it was a different finish.
The Tobeco lite plus matches the finish perfectly. Both obviously sit flush and are the same diameter. My Siglieli is ticking me off. You'd think with just one button, it would be fine, but it seems to have a problem where sometimes it detects multiple presses when I'm only pressing once to fire it, and it ends up going into settings for various things. It's actually getting difficult to vape with it at all because the button is so faulty. Seriously... It's a damn button.
I have had zero issues with the Hcigar clones. I got to play with an unknown clone from fasstech at a local shop, and i can tell you there is a difference in the construction. Especially the 510 area, and the pins. The switches were pretty similar, but i have the magnetic switch in mine, so in all fairness i really couldn't say which one is better in it's stock form. Threads and finish are pretty even, but the engraving on the unknown clone sucked to put it bluntly. Got two of the Hcigar nemesis clones with the fat daddy reduced throw pin and magnets. Side by side with a buddy's real one the clones looked just as good and the switches worked better.
And you're welcome for the info on fatdaddy. 
|
|
Quoted:
And you're welcome for the info on fatdaddy. Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
Hcigar Nemesis clone matches pretty damn well.
http://i135.photobucket.com/albums/q154/lcoates33/20140323_171710_zpsbumtxl6f.jpg ETA: My 3.1 is the Hcigar version. Which i kinda with i had not purchased, nothing wrong with it other than i wish it was a different finish.
The Tobeco lite plus matches the finish perfectly. Both obviously sit flush and are the same diameter. My Siglieli is ticking me off. You'd think with just one button, it would be fine, but it seems to have a problem where sometimes it detects multiple presses when I'm only pressing once to fire it, and it ends up going into settings for various things. It's actually getting difficult to vape with it at all because the button is so faulty. Seriously... It's a damn button.
I have had zero issues with the Hcigar clones. I got to play with an unknown clone from fasstech at a local shop, and i can tell you there is a difference in the construction. Especially the 510 area, and the pins. The switches were pretty similar, but i have the magnetic switch in mine, so in all fairness i really couldn't say which one is better in it's stock form. Threads and finish are pretty even, but the engraving on the unknown clone sucked to put it bluntly. Got two of the Hcigar nemesis clones with the fat daddy reduced throw pin and magnets. Side by side with a buddy's real one the clones looked just as good and the switches worked better.
And you're welcome for the info on fatdaddy. You cost to much per post. 
|
|
Quoted:
Hcigar Nemesis clone matches pretty damn well.
http://i135.photobucket.com/albums/q154/lcoates33/20140323_171710_zpsbumtxl6f.jpg ETA: My 3.1 is the Hcigar version. Which i kinda with i had not purchased, nothing wrong with it other than i wish it was a different finish.
The Tobeco lite plus matches the finish perfectly. Both obviously sit flush and are the same diameter. Yup, came here to post this. Here's mine, my newest piece: 
|