Posted: 10/24/2012 9:59:16 AM EDT
| I have read and read and it seems that Surefire 60 rd mags are just hit or miss. Well mine is a forkin miss. Anyway to tune these for Pmag reliability? |
|
Quoted:
Mine would not load properly when new. I disassembled and carefully re-assembled following the instructions. now it runs 100%. I use a MagLULA, and I think this might be the key to easy and consistent loading... give one a try. +1 to using the MagLULA. pat |
|
Quoted:
You will need to take it apart. Sounds like they assembled it wrong at the factory. I took one of mine apart once for cleaning and it took me forever to get it back together right. Pat Did so a couple of times and same thing. Called Surefire yesterday and the said sent it back in. He said there was some quality control problems with some batches. |
|
Quoted:
I tried several, including XM193. The problem I have is that I can only get 9 rounds in the mag. No more will go in, then when I try to take those 9 out the follower won't come back up. You have a spring that is fucked up. Take it out and unkink it and you should be GTG. I have three that are all GTG. I recommend pre-loading them and letting them sit before using them. This seems to help with future reliability. |