Posted: 5/2/2014 6:50:03 PM EDT
| Do the Benelli tubes work on the M3000? |
|
Good info here on the M3000.
http://www.brianenos.com/forums/index.php?showtopic=173219 And look at this company for stoeger parts. Top notch guy! http://www.brianenos.com/forums/index.php?showforum=290 edit: one of the benelli nuts fit sometimes, some need a little love to fit, others are a no go. MOA's fit all the time and are the same price as Nordics with the tube. I'm sure Mr. Tischauser will vouch forhe company. I also hear some of Taran tactical s parts fit, some need modifying. |
|
Quoted:
You can check out our YouTube channel for a bunch of info on M3000 modifications. Www.youtube.com/thetacticalbay great vid. Looking to pick one of these up soon. TXL |
|
Quoted:
Nordic Components Benelli Nova tube works. You may have to screw the nut in first then the tube. I ordered and received mine. Have not installed. Can you clarify this post? Looking at the youtube vids, looks like some dremel work, not an issue, but curious about your post. Do you mean after the dremel work, you need to screw on the threads to test for fit? Thanks, TXL |
|
Quoted:
I ordered and received mine. Have not installed. Can you clarify this post? Looking at the youtube vids, looks like some dremel work, not an issue, but curious about your post. Do you mean after the dremel work, you need to screw on the threads to test for fit? Thanks, TXL Quoted:
Quoted:
Nordic Components Benelli Nova tube works. You may have to screw the nut in first then the tube. I ordered and received mine. Have not installed. Can you clarify this post? Looking at the youtube vids, looks like some dremel work, not an issue, but curious about your post. Do you mean after the dremel work, you need to screw on the threads to test for fit? Thanks, TXL There is a little extra unthreaded material at the end of the OEM tube. It can stop the Nordic nut from screwing all the way down when you have the Nordic tube screwed into the nut. First screw the tube & nut together and screw it in the OEM tube and see if it seats fully. If it does you're good to go. If it doesn't you can either trim the extra material off the end of the OEM tube or simply screw the Nordic nut onto the OEM tube first then once it's seated screw the Nordic tube into the nut. |
|
Quoted:
I bought the Nordic tube for the benelli and was able to thread it right onto my M3000 without any mods. I think the issue is that Stoeger doesn't hold as right of tolerances as Benelli. Occasionally we get one that doesn't quite work with the Nova pitch pattern. The nut from MOA a Precision is supposed to fix that if anyone has an issue. |