Posted: 2/2/2005 5:15:54 AM EDT
|
Steve: I have a 16" AR-10 upper that I would like a JP Bennie Cooley compensator installed on. I have the comp that I will send with the barrel. It is a "post ban" thread 9/16X1/2. I don't have a AR 10 barrel wrench so the barrel will be on the upper. The barrel currently has the stock Armalite brake with two pins on the lower half - I have no idea if there are threads under it or what is going on underneath. The exit port on the Bennie Cooley needs to be enlarged for .308 and there is an additional port to be drilled for timing on the right side. say the word and its on the way!  thanks, Paul |