Product Suggestions (Page 19 of 21)
|
Originally Posted By Trumpet: Alright, Among my other suggestions, I'm going to put this one out there again.... Bring back the IMI Timberwolf. WHO'S WITH ME?!?!?!?!?!? 
|
I have answered the demand with a cannon shot, and our flag still waves proudly from the walls - I shall never surrender or retreat.
- W B Travis
Timeos Seres et dona ferrentes
- W B Travis
Timeos Seres et dona ferrentes
Here's one, pick up the remains of the latest Automag. Drop the STG, produce this classic badass pistol and run some good 44auto for it. That project has PSA written all over it! Who doesn't want to live out their Dirty Harry fantasy's with the real deal? Edited because I was too stupid to get the caliber correct... wtf!
|
|
Originally Posted By Dolor: Stoner 63a. That's the grail gun that no one is touching. (The RA thing doesn't count it wasn't a stoner clone, and it was made at a different time in the market) People love retro builds now. It would be a huge project but if anyone can pull it off, it's PSA. 
|
Stolen Firearm: Colt AR15, Serial # SP342380, 16" carbine. Stolen in California by Kevin Ayres, and taken to Missouri.
|
I'll say it again. I think that after the Supreme Court Bumpstock case (Cargill) and the overturning of Chevron (Loper Bright Enterprises v. Raimondo), open bolt semi autos are legal (their ban should be challenged). I would love to see PSA or someone else step up and make an open bolt Mac-10 or M11/9 and when the ATF rejects it, challenge them. |
|
Consider bringing back the H&R Handi Rifles. Use a heavy 16.25" threaded barrel with a full length picatinny rail down the top. Instead of the original pallet wood stock, use an adapter for side folding M4 stock. :like this: Offer in chamberings that can be well suppressed such as .300 BO, .338ARC, and 8.6 BO. Throw in .350 Legend for hunters restricted to single shot straight walled cartridges in a rifle with an external hammer. You can make limited runs in 5.7FN, 5.56NATO, and .277 WLV. Use your discretion on fitting other barrels. Offering a combo of a HandiRifle + either an 19" 20GA barrel or 16.25" 9mm barrel may sell plus reduce pressure to fit barrels. Offering 9mm vs. .357 Mag would simplify by using the same extractor as the .300 BO plus the inventory issues of having ..357 + .355" barrels. |
Call the tune and let's dance; but beware that the devil is the piper and the tab for that soiree will be hell to pay.
Training&Trigger Time are more important than chasing a hardware Holy Grail
Training&Trigger Time are more important than chasing a hardware Holy Grail
|
Originally Posted By Rob940: How about a PSA .50bmg rifle(s) and AAC 50BMG ammo? Originally Posted By Rob940: How about a PSA .50bmg rifle(s) and AAC 50BMG ammo? Originally Posted By Rob940: How about some PSA Rem 700 pattern receiver sets? I see you listened to me.  I can hear my credit card crying in the other room now.
|
Rob
|
https://www.ar15.com/forums/General/PSA-The-JAKL-2-0/5-2773400/?page=1 please look at the number of people requesting non-pinned/welded proprietary muzzle breaks on your less than 16" uppers. Plan B/Rearden is very popular, make a compatible muzzle device yourselves and you will make bank. |
 STINC Gepard Clone: Amazing AK-9 SMG Bullpup | SHOT Show 2025 whelp, I dont know how long ago I posted a comment saying to develop one of these, but it looks like Stuff and things is. |
|
Here's a fairly simple request. Can we get more AKs without the side optic rail? Atleast on the more classic, clone-appropriate models like AKMs and AK74s. I want a nice clean slickside AKM. I would have gotten the WBP, but they chose to treat the slickside model like a budget option and gave it a nitride barrel instead of the chrome-lined FB Radom barrels the rest of their AKMs get. Also, why do you hate underfolders PSA? 
|
Joined:
Apr 2023
Posts:
149
EE: 0% (0)
CO, USA
Joined:
Apr 2023
Posts:
150
EE: 0% (0)
CO, USA
|
Originally Posted By Rob940: I see you listened to me. I can hear my credit card crying in the other room now. Originally Posted By Rob940: Originally Posted By Rob940: How about a PSA .50bmg rifle(s) and AAC 50BMG ammo? Originally Posted By Rob940: How about some PSA Rem 700 pattern receiver sets? I see you listened to me. I can hear my credit card crying in the other room now. Excellently done sir!! 🫡 I’ve been wanting a “budget” 50 For years!!! Lemme go opposite ya and request a belt fed 22lr Upper. Maybe secretly dev that one (lakeside machine) and release along with 50🤪😳 that’d blow our minds |
Joined:
Apr 2023
Posts:
151
EE: 0% (0)
CO, USA
|
Originally Posted By Trumpet: GAH! The sudden influx of "bolt action 9mm" are blowing my mind!!!! Originally Posted By Trumpet: Originally Posted By Wandering_minstrel: Oh my God, I thought I was the only one to think about that... Though the bolt itself would need to be look at as well. GAH! The sudden influx of "bolt action 9mm" are blowing my mind!!!! I think you can kind of do that with a cmmg guard barrel and then whatever bolt Face you need??( Slightly bigger than 556)? |
| I think it's already been mentioned but 20rd Micro Dagger mags would be awesome. |
Greater love hath no man than this, that a man lay down his life for his friends. - John 15:13
The urge to save humanity is almost always only a false-face for the urge to rule it. - H.L. Mencken
The urge to save humanity is almost always only a false-face for the urge to rule it. - H.L. Mencken
|
Hey Josiah, For the 2011 you guys are working on, I think it'd be awesome if you guys could engineer the "Glock 48" of 2011's. One 2011 frame that can work with either a 5" GI or a 4" Commander slide. I know with 1911's you cannot swap slides/frames. I'm not sure if that applies to 2011's also, but I don't see why it wouldn't. |
| Recommendation: In addition to the new proprietary 6 ARC rifles you're bringing out that are only compatible with one mag, please add regular AR uppers in 6 ARC to your catalog. You have 7 6.5 Grendel uppers in stock right now that are just a barrel away from being 6 ARC. Most of us shooting ARCs and a Grendel's aren't having bolt issues, but even better, offer the basic uppers with an upgraded bolt design like the Rexus. Most lower capacity mags that are most useful for hunting or shooting prone already work fine, and once Duramag comes out with their Geissele mag copies hopefully larger capacity issues will be a thing of the past. |
Joined:
Dec 2023
Posts:
1033
EE: 100% (7)
USA
|
Bear Creek is now selling bolt action AR15 and AR10 (their version of AR10) upper receivers. They are fully compatible with all AR barrels, whose gas ports are covered by a sleeve, and all handguards that don't protrude behind the face of the upper. In the tech threads, guys are extremely excited to build these, and many are planning dedicated, short barrel silencer hosts. This is especially attractive, since many of your customers already have Short Barrel Rifle lowers. They have a wide variety of calibers. 5.56, 300 Blackout, 6.5 Grendel, 6mm ARC, 7.62x39, 350 Legend, 458 SOCOM, 450 Bushmaster, and 50 Beowulf for the standard AR15 frame. In their large frame, they make 308, 6.5 Creedmoor, and 243 Winchester. I think PSA could sell a huge number of these, and it only requires an Upper/BCG as a unique part. |
|
Josiah, I watched the you tube channel roll out for suppressors last night. You guys mentioned that SBRs would be available as well. Does this mean some of things that you currently sell in pistol confit will get SBR options. For example Krink’s, AK-V, AK-102s and some of the AR pistols inclufding retro stuff? |
“Firearm springs sometimes are made to be air soluble.” CSM Woods
|
Importing or licensing production of this underbarrel 12 gauge, which is basically a mini M203. Guy prototyping it is from Canada, would probably be thrilled to work with PSA in USA.  This Mini-Shotgun is a blast! And to repeat my previous suggestion, these should be firing PSA #1 16-pellet bulk buckshot. |