Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
Member Login

Site Notices
Page / 8
Link Posted: 9/17/2006 9:36:01 PM EDT
http://www.poormansmachinegun.com/Supressed%20upper.JPG

Here is my P.M.M.G with his muffled upper receiver!
Link Posted: 11/3/2006 10:49:59 PM EDT
Keep the photos comming!
Link Posted: 11/4/2006 9:13:18 AM EDT
I took some quick photos yesterday for another reason, so here's my housegun.  I've also been using it for 3-gun for a while now.

It's a Bushmaster "AK Shorty" (14.5 inch fluted barrel w/ AK muzzle brake) with:

CAA telescoping stock w/ spare mag carrier
EOTech on a Bennie Cooley adjustable gooseneck mount
Pelican M3 (9V) primary light with remote pressure switch in a Viking Tactics mount
Pelican M6 backup light mounted with a one inch scope ring
(both lights are hanging from a piece of picatinny rail bolted to the handguard)







Link Posted: 11/8/2006 6:06:13 PM EDT
My Evil Black Rifles, both Vector AKs in 7.62x39.
Link Posted: 11/10/2006 5:41:43 PM EDT
I finally got my M4-2000. So here it is on my 10.5" LMT/Stag SBR

Link Posted: 11/10/2006 7:11:01 PM EDT
Craig, you buy the can local or online?  I need one for my SBR as well.
Link Posted: 11/10/2006 10:47:25 PM EDT
[Last Edit: 11/10/2006 10:48:39 PM EDT by Hayseed_40]

Originally Posted By INTrooper4255:

Originally Posted By abnk:

Originally Posted By INTrooper4255:
Here is my new LMT MRP.  It has a 10.5 to play with and a 16 inch for duty use.



Were you the guy who complained about EOTech in the AR forum?  If so, how's the EOTech in the picture working for ya?


They (EOTech) did the announcement that they would accept returns for all of the sights that were leaning to have the new "revised" base fitted.  I sent mine in and had the new style base installed and so far, it sits level on everything.  It's a shame that they didn't take that kind of responsibility from the beginning, because they have lost this customer for life!  


Wow, everybody was right - it was your reciever...

And I'll post pics when I get the barrel and Joe shows me how to use a wrench.
Link Posted: 11/11/2006 8:04:39 AM EDT

Originally Posted By Hayseed_40:

Originally Posted By INTrooper4255:

Originally Posted By abnk:

Originally Posted By INTrooper4255:
Here is my new LMT MRP.  It has a 10.5 to play with and a 16 inch for duty use.



Were you the guy who complained about EOTech in the AR forum?  If so, how's the EOTech in the picture working for ya?


They (EOTech) did the announcement that they would accept returns for all of the sights that were leaning to have the new "revised" base fitted.  I sent mine in and had the new style base installed and so far, it sits level on everything.  It's a shame that they didn't take that kind of responsibility from the beginning, because they have lost this customer for life!  


Wow, everybody was right - it was your reciever...

And I'll post pics when I get the barrel and Joe shows me how to use a wrench.


I don't know how you came to that conclusion, but unfortunately, you are wrong.  They had a problem with some of the sights, which is why they redesigned the bases.
Link Posted: 11/11/2006 10:45:11 AM EDT

Originally Posted By INTrooper4255:

Originally Posted By Hayseed_40:

Originally Posted By INTrooper4255:

Originally Posted By abnk:

Originally Posted By INTrooper4255:
Here is my new LMT MRP.  It has a 10.5 to play with and a 16 inch for duty use.



Were you the guy who complained about EOTech in the AR forum?  If so, how's the EOTech in the picture working for ya?


They (EOTech) did the announcement that they would accept returns for all of the sights that were leaning to have the new "revised" base fitted.  I sent mine in and had the new style base installed and so far, it sits level on everything.  It's a shame that they didn't take that kind of responsibility from the beginning, because they have lost this customer for life!  


Wow, everybody was right - it was your reciever...

And I'll post pics when I get the barrel and Joe shows me how to use a wrench.


I don't know how you came to that conclusion, but unfortunately, you are wrong.  They had a problem with some of the sights, which is why they redesigned the bases.


Sorry to have missed my sarcasm.  I was yanking on all those who swore up and down that you were crazy and it HAD to be your reciever and Eotech could not have made a mistake.
Link Posted: 11/11/2006 11:56:46 AM EDT

Originally Posted By Hayseed_40:

Originally Posted By INTrooper4255:

Originally Posted By Hayseed_40:

Originally Posted By INTrooper4255:

Originally Posted By abnk:

Originally Posted By INTrooper4255:
Here is my new LMT MRP.  It has a 10.5 to play with and a 16 inch for duty use.



Were you the guy who complained about EOTech in the AR forum?  If so, how's the EOTech in the picture working for ya?


They (EOTech) did the announcement that they would accept returns for all of the sights that were leaning to have the new "revised" base fitted.  I sent mine in and had the new style base installed and so far, it sits level on everything.  It's a shame that they didn't take that kind of responsibility from the beginning, because they have lost this customer for life!  


Wow, everybody was right - it was your reciever...

And I'll post pics when I get the barrel and Joe shows me how to use a wrench.


I don't know how you came to that conclusion, but unfortunately, you are wrong.  They had a problem with some of the sights, which is why they redesigned the bases.


Sorry to have missed my sarcasm.  I was yanking on all those who swore up and down that you were crazy and it HAD to be your reciever and Eotech could not have made a mistake.


Oops, Sorry Hayseed, I did miss your sarcasm.
Link Posted: 11/11/2006 1:21:00 PM EDT

Originally Posted By INTrooper4255:

Originally Posted By Hayseed_40:

Originally Posted By INTrooper4255:

Originally Posted By Hayseed_40:

Originally Posted By INTrooper4255:

Originally Posted By abnk:

Originally Posted By INTrooper4255:
Here is my new LMT MRP.  It has a 10.5 to play with and a 16 inch for duty use.



Were you the guy who complained about EOTech in the AR forum?  If so, how's the EOTech in the picture working for ya?


They (EOTech) did the announcement that they would accept returns for all of the sights that were leaning to have the new "revised" base fitted.  I sent mine in and had the new style base installed and so far, it sits level on everything.  It's a shame that they didn't take that kind of responsibility from the beginning, because they have lost this customer for life!  


Wow, everybody was right - it was your reciever...

And I'll post pics when I get the barrel and Joe shows me how to use a wrench.


I don't know how you came to that conclusion, but unfortunately, you are wrong.  They had a problem with some of the sights, which is why they redesigned the bases.


Sorry to have missed my sarcasm.  I was yanking on all those who swore up and down that you were crazy and it HAD to be your reciever and Eotech could not have made a mistake.


Oops, Sorry Hayseed, I did miss your sarcasm.


That's okay - my sarcasm is often disguised as a poor attempt at humor.  Anywho, sorry for hijacking the thread.  back to the black rifle porn.
Link Posted: 11/11/2006 5:02:12 PM EDT


A newer... family photo of sorts

Link Posted: 11/11/2006 8:06:36 PM EDT
[Last Edit: 11/11/2006 8:06:53 PM EDT by Krazny13]
New addition to the Family:

Not black, but definatly a force to be reckoned with.

Link Posted: 11/15/2006 12:42:02 PM EDT
[Last Edit: 11/19/2006 9:52:43 PM EDT by NineMMAR15]


RRA LAR15 SBR (Reg: 9MM & .223)
11.5" Model 1 Sales 223 upper

Glock 23 w/ Lone Wolf Dist threaded Glk 23/40 to 19/9mm conversion barrel
Gem-tech Trinity/ 9MM Suppressor

Gem-tech Halo/ 223 Suppressor in the not to distant future!
Link Posted: 11/18/2006 2:56:03 PM EDT

Born and raised in Evansville...can I still play?



Link Posted: 11/19/2006 7:54:08 PM EDT
Updated!  Hooray for LW gas pistons!

From:  


To:
Link Posted: 11/23/2006 1:33:45 PM EDT









The paint isn't as shiny/glossy in real life.






Link Posted: 11/26/2006 12:08:08 AM EDT
Link Posted: 11/28/2006 2:30:02 PM EDT




Link Posted: 11/30/2006 5:00:13 AM EDT







Link Posted: 11/30/2006 5:18:30 AM EDT
Link Posted: 12/2/2006 1:26:02 PM EDT
[Last Edit: 12/2/2006 1:28:23 PM EDT by Hayseed_40]
Here is my kiss rifle.



Link Posted: 12/5/2006 11:16:05 AM EDT
[Last Edit: 7/30/2007 10:41:51 AM EDT by JA4]
Here is my collection to date. I can see this possibly getting out of hand in the future..lol

Marlin 30-30
RRA Tactical CAR A-4
Beretta .22
Springfield .40 subcompact
S&W .357 Mag



http://i138.photobucket.com/albums/q257/JA4_photo/100_0330.jpg
Link Posted: 1/2/2007 12:16:26 AM EDT
[Last Edit: 1/2/2007 7:06:48 PM EDT by GreenRifle]



Link Posted: 1/2/2007 12:39:46 AM EDT
[Last Edit: 1/7/2007 11:27:27 AM EDT by terrance250]
Link Posted: 1/2/2007 1:28:59 AM EDT





shoulda been mrgreen
Link Posted: 1/3/2007 1:26:18 AM EDT


Link Posted: 1/3/2007 6:06:22 PM EDT
Link Posted: 1/14/2007 8:27:48 PM EDT
[Last Edit: 1/14/2007 9:31:51 PM EDT by geta2j]
OK I am next...



My "black" rifles. OK technically speaking they are both carbines.

One is RRA M4? I think.



The other is a Hi- point 9MM with an aftermkt stock. I was surprised at how simple it was and the fact that ME ( a newbie at guns!) was able to get it installed!!!



OH I almost forgot the "twins"



Please be kind to me I am new to this...

Michael    
Link Posted: 1/14/2007 10:17:05 PM EDT
 HIPOINT   ..............................I know....they work!
Link Posted: 1/14/2007 11:18:34 PM EDT


10.5 " RRA 9MM AR15 SBR W/ Gemtech Trinity Silencer
11.5" Model 1 Sales .223 Upper
Cohaire Arms  A.K.A (Special Weapons / Bobcat Weapons/ Vector Arms) CA89 MP5 Style Pistol soon to be yet another SBR
Link Posted: 1/15/2007 2:45:54 AM EDT
The Recce in its latest iteration:



Finally got that ACOG, and added a CTR.  

Just need a sling and either a bipod or VFG and its done. . .
Link Posted: 1/15/2007 6:30:29 PM EDT
MY Bushy and a couple of friends
Link Posted: 1/20/2007 10:56:06 PM EDT
this thread needs to be tacked.
Link Posted: 1/31/2007 12:55:10 AM EDT
[Last Edit: 1/31/2007 12:56:01 AM EDT by brdvictim]
Here is my lonely for now black rifle.




You look hard enuff you can see my black and silver duo tone bersa laying in the backround.
New mods to come pending a job.
Link Posted: 1/31/2007 1:21:43 AM EDT
[Last Edit: 1/31/2007 3:19:29 PM EDT by paddle3]
MI winter transplant here.

Picked up this rig at the Evansville show this past weekend.

Bushmaster A3 16" with a D740 Gen III NV scope.



Link Posted: 2/2/2007 3:16:39 PM EDT
Ok, I need a muffler for the build I'm doing now.  How do I go about it, as far as the legal stuff goes?  Thanks -Ryan
Link Posted: 2/7/2007 6:27:56 PM EDT
Only pic I got of my soon to be SBR. And its blurry as hell. NineMMAR15 is your name Jason?




Heres my RRA.

Link Posted: 2/8/2007 4:03:16 AM EDT
Originally Posted By WHITE_WOLFE:
Only pic I got of my soon to be SBR. And its blurry as hell. NineMMAR15 is your name Jason?

Yes it is!
Link Posted: 2/8/2007 11:20:39 AM EDT

Originally Posted By NineMMAR15:
Originally Posted By WHITE_WOLFE:
Only pic I got of my soon to be SBR. And its blurry as hell. NineMMAR15 is your name Jason?

Yes it is!


Thought so. I come to the range every so often. You are usually the one that checks me in.
Link Posted: 2/28/2007 10:26:50 AM EDT








Link Posted: 3/1/2007 8:43:11 PM EDT
Here is my latest SBR project, it only took 36days mailbox to mailbox.......And it runs like a champ!

Cohaire Arms CA89 SBR (MP5 Clone)


Link Posted: 3/1/2007 9:07:27 PM EDT
[Last Edit: 3/3/2007 8:29:10 PM EDT by WHITE_WOLFE]

Originally Posted By NineMMAR15:
Here is my latest SBR project, it only took 36days mailbox to mailbox.......And it runs like a champ!

Cohaire Arms CA89 SBR (MP5 Clone)


www.poormansmachinegun.com/images/Mp5%20clone.JPG



AWESOME......Can I shoot it?


ETA: I shot it today and now.......can you guess?.............I want one!!!!!!!

Its Sweeeet!!!

Thanks Jason. Also....my stamp was in the mailbox when I got home for my AR SBR! Only 29 days.
Link Posted: 3/6/2007 11:43:10 AM EDT

Originally Posted By NineMMAR15:
www.poormansmachinegun.com/images/Jason%20SMG2med.jpg


WHERE'S THE RUBBER BAND  !
Link Posted: 3/6/2007 11:54:29 AM EDT

Originally Posted By NineMMAR15:
Here is my latest SBR project, it only took 36days mailbox to mailbox.......And it runs like a champ!

Cohaire Arms CA89 SBR (MP5 Clone)


www.poormansmachinegun.com/images/Mp5%20clone.JPG



Have you been able to get the mp5 to bump fire !!!!!!!!!
Link Posted: 3/6/2007 1:26:50 PM EDT

Originally Posted By COLT:

Originally Posted By NineMMAR15:
Here is my latest SBR project, it only took 36days mailbox to mailbox.......And it runs like a champ!

Cohaire Arms CA89 SBR (MP5 Clone)


www.poormansmachinegun.com/images/Mp5%20clone.JPG



Have you been able to get the mp5 to bump fire !!!!!!!!!


I started to ask him that and forgot. I was also going to ask him who did the engraving on the MP5.
Link Posted: 3/6/2007 2:25:53 PM EDT

Originally Posted By WHITE_WOLFE:

I started to ask him that and forgot. I was also going to ask him who did the engraving on the MP5.


Bill Mains Gun Engraving / Knights Town, Indiana  did the engraving for me! They charge like $40.00  

Sadly...  it can not be bump fired.....................  YET!
Link Posted: 3/9/2007 11:31:33 AM EDT
[Last Edit: 3/9/2007 11:48:25 AM EDT by ocwatchdog]
DPMS AP4
yhm ff quad rail
yhm flip-up front site/gas block
ergo grip
RRA 2-stage trigger
vortex flach hider
cut down handle rear sight
caa cheek saddle
tru-glo 2x red dot
http://i154.photobucket.com/albums/s273/weld_carl/138730930_453084705_0.jpg
Link Posted: 4/16/2007 7:20:04 PM EDT
Link Posted: 4/16/2007 11:44:11 PM EDT
tack this bad boy
Page / 8
Top Top